Message Id: 4137; Message Id: 4140; Message Id: 4141; Message Id: 4169 - HP ProLight Server Troubleshooting Manual

IMPORTANT: Processor socket 1 and PPM slot 1 must be populated at all times or the server does not
function properly.
PPMs, except the PPM installed in slot 1
DIMMs, except the first bank
Hard drives
Peripheral devices
Install each remaining system component, rebooting between each installation to isolate any failed
2.
components.
Clear the system NVRAM.
3.
Replace the system board.
4.
IMPORTANT: If replacing the system board or clearing NVRAM, you must re-enter the server serial number
through RBSU ("Re-entering the server serial number and product
®
Windows Event Log processor error codes

Message ID: 4137

Severity: Error
Description: The processor in slot X, socket X has corrected an excessive number of internal errors. The
system will continue to operate.
Action: Replace the processor.

Message ID: 4140

Severity: Warning
Description: The system is operating with a heterogeneous processor environment.
Action: None

Message ID: 4141

Severity: Warning
Description: Only X out of the X installed processors have been started by the operating system. The
system will continue to operate.
Action: Confirm that the license agreement in use supports all of the installed processors.

Message ID: 4169

Severity: Warning
Description: The processor in slot X, socket X has corrected an excessive number of internal errors. The
system will continue to operate.
Action: Replace the processor.

Message ID: 4190

Severity: Error
ID" on page 57).
Error messages 134