Adu Error Messages; Introduction To Adu Error Messages; Accelerator Board Not Detected; Accelerator Error Log - HP ProLight Server Troubleshooting Manual

Hewlett-packard proliant servers troubleshooting guide
Table of Contents

Advertisement

Error messages
In this section

ADU error messages............................................................................................................................... 73

POST error messages and beep codes...................................................................................................... 92
Event list error messages ....................................................................................................................... 124
HP BladeSystem infrastructure error codes............................................................................................... 127
Port 85 codes and iLO messages ........................................................................................................... 131
Windows® Event Log processor error codes ........................................................................................... 134
Insight Diagnostics processor error codes ................................................................................................ 135
ADU error messages

Introduction to ADU error messages

This section contains a complete alphabetical list of all ADU
messages.
IMPORTANT: This guide provides information for multiple servers. Some information may not apply to the
server you are troubleshooting. Refer to the server documentation for information on procedures, hardware
options, software tools, and operating systems supported by the server.
WARNING: To avoid potential problems, ALWAYS read the warnings and cautionary
information in the server documentation before removing, replacing, reseating, or
modifying system components.

Accelerator Board not Detected

Description: Array controller did not detect a configured array accelerator board.
Action: Install an array accelerator board on an array controller. If an array accelerator board is
installed, check for proper seating on the array controller board.

Accelerator Error Log

Description: List of the last 32 parity errors on transfers to or from the memory on the array accelerator
board. Displays starting memory address, transfer count, and operation (read and write).
Action: If many parity errors are listed, you may need to replace the array accelerator board.

Accelerator Parity Read Errors: X

Description: Number of times that read memory parity errors were detected during transfers from
memory on the array accelerator board.
Action: If many parity errors occurred, you may need to replace the array accelerator board.
("Array Diagnostic
Utility" on page 63) error
Error messages 73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents