Replacing The Fan And Fan Filter; Replace The Fan Filter; Replace The System Fan - Advantech IPC-6806S User Manual

3.2 Replacing the fan and fan filter

To replace the system fan or fan filter at the front end of the chassis, refer
to Figure 3-1 and proceed as follows:

3.2.1 Replace the fan filter

1. Remove the two screws located at the bottom of the filter cover.
Gently but firmly pull the fan filter cover free from the chassis.
2. Remove the fan filter and replace it with a new one.

3.2.2 Replace the system fan

1. Remove the fan holder from the chassis.
2. Unplug the fan power connector.
3. Remove the four screws, which mount the fan to the fan holder, and
take out the fan.
4. Place a new fan in the fan holder, and fasten it with four screws.
5. Return the fan holder and plug in the fan power connector from
inside the chassis.
6. Return the fan filter and the fan filter cover, and fasten the filter
cover with two screws.
Figure 3.1: Changing the fan and filter
19 Chapter 3