Installing Disk Drives; Hard Disk Drive - Advantech IPC-6806S User Manual

2.3 Installing disk drives

IPC-6806S accepts one floppy disk drive, and one internal SATA/ATA
HDD. To install the disk drives, refer to Figure 2-3 and proceed as fol-
lows:

2.3.1 Hard disk drive

1. Detach the HDD mounting brackets by removing the four retaining
screws.
2. Refer to Figure 2-3, align the holes on each side of the HDD with
those of the HDD mounting brackets and fix the HDD with screws.
3. Place the HDD together with HDD mounting brackets to the inside
of the top cover of IPC-6806S, and fix it with the four screws
removed in Step 1.
4. Connect a 40-pin flat cable from the CPU card to an ATA (IDE)
HDD or a SATA cable from the CPU card to a SATA HDD.
5. Plug-in a peripheral power connector into the HDD.
IPC-6806S User Manual
Figure 2.3: Installing drives
12