Symbol Definitions; Command And Response Table For Sis Commands - Extron electronics FOX DA8 Plus User Manual

Symbol Definitions

Symbols (variables), defined below, are used in the command and response table. The
symbols represent variables in the command and response table fields.
]
= Carriage return and line feed
}
= Carriage return (no line feed)
• = space
X!
= Output
X@
= Mute status
X#
= Reclockable input number
X$
= Input reclocker rate
X%
= Name
X^
= Firmware version
X&
= Transceiver module status
X*
= Temperature
X(
= Transceiver module status
X1)
= DA configuration switch position

Command and Response Table for SIS Commands

Command Function
Mutes
:
The channel mute commands mute the data on the output only. The output continues to emit light
NOTE
Mute output
Unmute output
Show video mute status
Mute all outputs
Unmute all outputs
Show mute status of all outputs
Reclocking
Set reclocker mode
Example 1:
Example 2:
Show reclocker mode
Device naming
Set device name
Example:
Set device to factory default name
View device name
Information Requests
Information request
Show firmware version
Example:
1 through 8
0 = off (unmuted)
00 = all inputs
01 = input 1 (group A)
05 = input 5 (group C)
00 = Bypass (no reclocking)
01 = 1.25 Gbps
Up to 24 alphanumeric characters, excluding spaces or blank characters. The
first character must be alphabetic and the last character cannot be a hyphen or
or minus sign.
Vx.xx
0 = no light input
nnnF = whole degree Fahrenheit
0 = no module installed
1 = 1x8 DA (Default)
ASCII Command Response
(Host to Unit) (Unit to Host)
X!
*1B
Vmt
X!
*0B
Vmt
X! X@]
B
1*B
Vmt1
0*B Vmt0
E } X@ X@
VM 1
X# X$
* = Rte
0*0= Rte00*00
5*2=
Rte05*02
X# X$]
=
EX% }
CN Ipn•
E }
Active_DA_1CN Ipn•Active_DA_1
E }
Ipn•FOX-DA8-Plus ]
•CN
E } X%]
CN
I
V01X08•A00X00
X^]
Q
Q
1.23
1 = on (muted)
03 = input 3 (group B)
07 = input 7 (group D)
02 = 2.125 Gbps
03 = 4.25 Gbps (default)
1 = light input
2 = singlemode
2 = Two 1x4 DAs
Additional description
X! *1 ]
Blank data on optical output
X! *0 ]
Output data on optical output
X!
Output
]
Blank data on all optical outputs.
]
Output data on all optical outputs.
X@ X@ X@ ]
2 3 4 ... 8 Show output 1 through output 8 mute
status.
X# X$]
*
Set the reclocker mode for input
]
Set the reclocker mode for all inputs to
bypass (do not reclock).
]
Set the reclocker mode for input 5
(group C) to 2.125 Gbps.
X%]
Set the name of the DA to
]
Name the unit "Active_DA_1."
The device name is
]
V01X08 shows the number of available
inputs (1) and outputs (8) for this
product. A00X00 has no meaning for
this product.
]
The factory-installed controller firmware
version is 1.23 (sample value only).
FOX DA8 Plus • Remote Control
1 = multimode
3 = Four 1x2 DAs
.
X!
.
X!
.
X@
data output mute status is .
X# X$
to .
X%
.
X%
.
11