Table of Contents
Advertisement
Chapter 2 System Setup
The following procedures are provided to assist you in installing a moth-
erboard, drives, and add-in cards into an IPC-603MB chassis. Refer to
Appendix A, Exploded Diagram, for the names of each part used in this
manual.
Note
IPC-603MB User Manual
Figure 2-1 is the summary illustration for install-
ing the whole IPC-603MB system. To shorten the
total system installation time, we suggest users
to install a motherboard first, then the riser card
and add-in card(s), and finally, the drive bay.
Figure 2-1 System setup
6
Advertisement
Table of Contents
