Installation; Tools Needed; Unpacking - Landice Move Series Owner's Manual

2. Installation

2.1.

Tools Needed

• M8 hex key/screwdriver tool (included in hardware kit).
A wrench with an M8 socket and may also be used.
• Razor knife/box cutter or scissors for removing packaging
(not included).
• Ratchet strap (provided) to secure the treadmill in the folded
position if it must be carried through doorways or up/down
stairs.
• Moving blanket or beach towel (not included) is
recommended to protect treadmill and surroundings if moving
the treadmill through doorways or up/down stairs.
2.2.

Unpacking

Unpacking and installation of the treadmill requires two people.
The packaged treadmill weighs 375 lb.
If the desired location for the treadmill is through a doorway or
up/down stairs, the treadmill must be unboxed first and then
moved to its final location. A strap is provided to secure the
treadmill in its folded position while it is being moved.
WARNING
WARNING
CAUTION CAUTION
CAUTION CAUTION
Failure to leave ample clearance at the rear of the
treadmill could result in the user becoming trapped
between the treadmill and the wall should the user
accidentally trip and fall while exercising.
To avoid injury and damage to the
treadmill or its surroundings, two
people are required to move the
treadmill. Use caution when
moving and lifting the treadmill
during unpacking and assembly.
Do not move unboxed treadmill by
dragging or sliding it.
Be careful! Carton straps are under tension.
To avoid damaging the treadmill, DO NOT cut
through the center of the box.
19