17.13.4
Temperature Lower
Triggers an alarm when the transducer reports a temperature below the set temperature.
17.13.5
Temperature Rate
Triggers an alarm when the transducer reports a temperature variation rate above the set
temperature.
17.14 SAVE SETTINGS TO USER C-CARD
This option saves the complete set of Fish Finder settings to an optional User C-CARD. This
is useful to avoid the user having to retune up Fish Finder after a RAM Clear operation or
a software update.
17.15 LOAD SETTINGS FROM USER C-CARD
This option loads the complete set of Fish Finder settings from the User C-CARD (Memory
Card that may be used to backup the User Points and Tracks too).
17.16 RESTORE CURRENT PRESET DEFAULTS
This option restores the default values only for the current presets and does not affect the
other presets.
CPF180i and CPF300i
Figure 17.14 - C-CARD - Save settings
Figure 17.15 - C-CARD - Load settings
Page 145