The available Units of Measure for Distance are: Nm, Sm, Km, Nm+Ft, Nm+m. Note when "Nm+Ft"
is selected if the distance is less than 1.0 Nm, it turns to Feet. When "Nm+m" is selected if the
distance is less than 1.0 Nm, it turns to Meters.
3.9
ABOUT PAGE
From Main Menu page it is possible to select the About page containing Software, Chart and
optional devices information.
1
Software System Information
2 Cartography Information
3 Storage Capacity
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight About... and press [ENT] or move the
ShuttlePoint knob to the right.
3. The Information page appears on the screen (see the previous Figure).
4. Press [CLR] or move the ShuttlePoint knob to the left to exit and show the Chart page.
CPF180i and CPF300i
NOTE*
Figure 3.9 - Example of About page
XXXXXX
YY.YY
INTCHART 1: WW-M012.03 MARINE FRESHWATER WWBK
M-NA-M632.00 LOS ANGELES and SAN PEDRO BAYS
1
1
2
3
Designed for
Page 43