Displaying The Fish Finder Page - Standard Horizon CPF180i Owner's Manual

thermoclines.
White Line
The White Line shows the difference between hard, soft bottoms and even distinguish-
es between fishes and structures located near the bottom. In this way it is easier to tell
the difference between a hard and soft bottom and even to distinguish fishes and
structures located nearby the bottom.
Surface Clutter
Appears like noise at the top of the screen extending many feet below the surface. It's
caused by many things, including air bubbles, bait fish, plankton and algae.
Structures
Generally, the term "structure" is used to identify objects like wrecks and weeds rising
from the bottom.
Bottom Echo Profile
Bottom profile recorded by the Fish Finder. When the echo sounder is set in Auto
Range mode, the bottom is kept in the lower half in the display.
17.2

DISPLAYING THE FISH FINDER PAGE

This section explains how to show and customize the selection of the Fish Finder display
pages.
1. From all pages (except the Fish Finder page), press [MENU].
From Fish Finder page, press [MENU] two times.
2. Move the ShuttlePoint knob to highlight FISH FINDER on CPF300i or RADAR/FISH on
CPF180i; press [ENT].
Page 132
Figure 17.2 - Main Menu on CPF300i
Figure 17.2a - Fish Finder page selection menu on CPF300i
CPF180i and CPF300i