Goto A Route; Using [Goto] To Select Route - Standard Horizon CPF180i Owner's Manual

9.6

GOTO A ROUTE

By having created some Routes, you can choose one of them to place a GOTO on.
9.6.0

Using [GOTO] to select Route

1. Move the ShuttlePoint knob to an open position (no buoy, warning etc. under the cursor)
on the Chart page.
2. Press [GOTO] to show the GOTO popup window.
3. Move the ShuttlePoint knob to highlight ROUTE and press [ENT].
4. The SELECT ROUTE popup window will be shown.
5. Move the ShuttlePoint knob to the highlight the desired Route and press [ENT].
6. On the Chart page a circle with a flag is shown on the first leg of the Route and a navigation
line is shown, indicating the GPS Chart Plotter is navigating to the first Waypoint in the
Route.
CPF180i and CPF300i
Figure 9.5a - Inserting Waypoint procedure (2)
Figure 9.6.0 - GOTO ROUTE procedure (1)
Figure 9.6.0a - GOTO ROUTE procedure (2)
Page 79