Loading A File From The Optional User C-Card; Deleting A File From The Optional User C-Card; Refreshing The Optional User C-Card - Standard Horizon CPF180i Owner's Manual

3. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]
4. A screen will appear. Move the ShuttlePoint knob to the left to highlight SAVE and
press [ENT].
5. A popup SAVE FILE window will appear. In this window you can change the name
and the file type by using the ShuttlePoint knob and pressing [ENT], when finished
press [CLR] once.
6. To save the file, move the ShuttlePoint knob to SAVE in window and press [ENT].
7. A Information pop window will momentarily be shown "SAVING" then show SAVING OK.
8. Press [ENT] to confirm.

11.0.2 Loading a file from the optional User C-CARD

If you have a problem and accidentally loose the User Points in the GPS
with the optional User C-CARD it is possible to load the data back into the GPS
using the following procedure:
Plotter
1.
Press [MENU], move
[ENT]
.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]
3. Select the saved file from the User C-CARD list by using the ShuttlePoint knob and
press [ENT].
4. Move the ShuttlePoint knob to the left to highlight LOAD and press [ENT].
5. A popup information window will appear when loading is complete.
6. Press [ENT] to confirm.

11.0.3 Deleting a file from the optional User C-CARD

You may want to delete a saved file on the User C-CARD.
1.
Press [MENU], move
[ENT]
.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]
3. Select the saved file from the User C-CARD list by using the ShuttlePoint knob and
press [ENT].
4. Move the ShuttlePoint knob to the left to highlight DELETE and press [ENT].
5. A popup Warning window will to confirm you want to delete the file.
6. Press [ENT] to confirm.

11.0.4 Refreshing the optional User C-CARD

You may want to change the User C-CARD inserted in the slot with a new one.
1.
Press [MENU], move
[ENT] .
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT].
3. Open the door, remove the User C-CARD from the slot and insert another User
C-CARD into the same slot.
4. Move the ShuttlePoint knob to highlight REFRESH and press [ENT]. This "new"
User C-CARD is now
Page 88
the ShuttlePoint knob to highlight USER POINTS and press
the ShuttlePoint knob to highlight USER POINTS and press
the ShuttlePoint knob to highlight USER POINTS and press
ready to receive and store information.
.
Chart Plotter
Chart
.
.
CPF180i and CPF300i