5.8.0
Shallow Water
Triggers an alarm when depth becomes shallower than the set depth.
5.8.1
Depth Water
Triggers an alarm when depth becomes deeper than the set depth.
5.8.2
Fish
The options for Fish Alarm set the size of the fishes that, if detected by the unit, switches
an alarm to sound. The options are: Off, Small, Medium, Big and Huge. The alarm sounds
if the set size (or bigger) is detected.
5.8.3
Temperature Upper
Triggers an alarm when the transducer reports a temperature above the set temperature.
5.8.4
Temperature Lower
Triggers an alarm when the transducer reports a temperature below the set temperature.
5.8.5
Temperature Rate
Triggers an alarm when the transducer reports a temperature variation rate above the set
temperature.
5.9
SAVE SETTINGS TO USER C-CARD
This option saves the complete set of Fish Finder settings to the User C-CARD. This is useful to avoid
the user having to retune up Fish Finder after a Clear RAM operation or a software update.
5.10
LOAD SETTINGS FROM USER C-CARD
This option loads the complete set of Fish Finder settings from the User C-CARD (Memory
Card that may be used to backup the User Points and Tracks too).
Page 36
Figure 5.9 - C-Card - Save settings
FF520