Connecting The Interface Cable To The Scanner - Denso GT10B-SU User Manual

2.2 Connecting the Interface Cable to the Scanner

(1) Pull the connector cover of the interface cable off its connector as shown below.
(2) Plug the interface cable connector into the connector located in the bottom of the scanner.
Note: As shown below, hold the scanner body, align the
fully insert the interface cable connector.
Interface cable connector
Connector cover
(3) Align the two bosses on the connector cover with cutouts in the scanner body, fit the connector cover into the scanner,
and turn it clockwise to lock it.
mark on the cable connector with that on the scanner, and
Scanner
mark
Cutout
Boss
Connector cover
3
mark
Connector cover
Turn the cover until
the bosses come to be
horizontal.