Kubota WSM F2880 Workshop Manual page 92

F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
Rocker Arm and Push Rod
1. Remove the rocker arm bracket nut.
2. Detach the rocker arm assembly (1).
3. Remove the push rods (2).
(When reassembling)
• When refitting the push rods (2) into the tappets (3), make sure
the push rod locates correctly into the tappet seat.
IMPORTANT
• After installing the rocker arm, be sure to adjust the valve
clearance.
Tightening torque Rocker arm bracket nut
(1) Rocker Arm Assembly
(2) Push Rod
1-S26
ENGINE
21.6 to 26.5 N·m
2.2 to 2.7 kgf·m
15.9 to 19.5 ft-lbs
(3) Tappet
W1021437
KiSC issued 04, 2006 A