Kubota WSM F2880 Workshop Manual page 87

F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
Bonnet
1. Unscrew the bonnet mounting screws (2) and nuts.
2. Remove the bonnet (1) from the frame (3).
(1) Bonnet
(2) Bonnet Mounting Screw
Air Cleaner
1. Remove the air cleaner (1) with hoses from the intake manifold.
(1) Air Cleaner
Wiring, Accelerator Wire and Hose
1. Disconnect the wiring (1) from the glow plug.
2. Disconnect 1P connectors (3), (10) from the coolant temperature
sensors.
3. Disconnect 2P connector (8) from the engine stop solenoid.
4. Disconnect the accelerator wire (6).
5. Disconnect the delivery hoses (9) from the flow priority valve.
6. Remove the fuse box (4).
7. Disconnect the radiator upper hose (2) from the thermostat
cover.
8. Disconnect the fuel hose (5) and fuel return hose (7).
(1) Wiring
(2) Radiator Upper Hose
(3) 1P Connector
(4) Fuse Box
(5) Fuel Hose
Wiring and Hose
1. Disconnect the wiring (2) and 2P connector (3) from the
alternator.
2. Disconnect the wiring (4) and 1P connectors (5) from the starter.
3. Disconnect the 1P connector (7) from the oil pressure switch.
4. Disconnect the ground cable (9).
5. Disconnect the radiator lower hose (1).
6. Remove the drain hoses (6), (8) from the drain plug.
(1) Radiator Lower Hose
(2) Wiring
(3) 2P Connector
(4) Wiring
(5) 1P Connector
1-S21
ENGINE
(2) Frame
W1042247
W1043401
(6) Accelerator Wire
(7) Fuel Return Hose
(8) 2P Connector
(9) Delivery Hose
(10) 1P Connector
W1033679
(6) Drain Hose
(7) 1P Connector
(8) Drain Hose
(9) Ground Cable
W1046215
KiSC issued 04, 2006 A