Kubota WSM F2880 Workshop Manual page 52

F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
Bushing Replacing Tool
Application: Use to press out and press fit the bushing.
1. For small end bushing
A 157 mm (6.1811 in.)
B 24 mm (0.9449 in.)
C 120 mm (4.7244 in.)
D 21.8 to 21.9 mm dia. (0.8583 to 0.8622 in. dia.)
E 24.8 to 24.9 mm dia. (0.9764 to 0.9803 in. dia.)
F 20 mm dia. (0.7874 in. dia.)
6.3 µm (250 µin.)
a
6.3 µm (250 µin.)
b
2. For idle gear bushing
A 196 mm (7.7165 in.)
B 26 mm (1.0236 in.)
C 150 mm (5.9055 in.)
D 25.8 to 25.9 mm dia. (1.0157 to 1.0197 in. dia.)
E 28.8 to 28.9 mm dia. (1.1339 to 1.1378 in. dia.)
F 20 mm dia. (0.7874 in. dia.)
6.3 µm (250 µin.)
a
6.3 µm (250 µin.)
b
Flywheel Stopper
Application: Use to loosen and tighten the flywheel screw.
A 20 mm (0.79 in.)
B 15 mm (0.59 in.)
C 10 mm dia. (0.39 in. dia.)
D 30 mm (1.18 in.)
E 8 mm (0.31 in.)
F 200 mm (7.87 in.)
G-39
G GENERAL
W12358870
W10259480
KiSC issued 04, 2006 A