Kubota WSM F2880 Workshop Manual page 26

F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
Checking Engine Oil Level
CAUTION
• Always stop the engine and remove the key before checking
oil.
1. Check engine oil before starting and 5 minutes or more after the
engine has stopped.
2. Wipe dipstick (2) area clean.
3. To check the oil level, remove the dipstick (2), wipe it clean,
reinsert it, and draw it out again. Check to see that the oil level
is between the two notches.
4. Add new oil to the prescribed level at the oil inlet (1) if necessary.
5. When using a different brand or viscosity oil from the previous
one, remove all of the old oil and oil filter. Never mix two different
types of oil.
6. Use the proper Engine Oil SAE according to the ambient
temperatures. (See page G-7.)
(1) Engine Oil Inlet
(2) Oil Level Dipstick
G-13
G GENERAL
A : Oil level is acceptable within this
range
W1047516
KiSC issued 04, 2006 A