Tightening Torques - Kubota WSM F2880 Workshop Manual

F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM

3. TIGHTENING TORQUES

Tightening torques of screws bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-8.)
Oil strainer
ROPS mounting screw
Seat base mounting screw
Drive shaft mounting screw
Cylinder head cover cap nut
Injection pipe retaining nut
Nozzle holder assembly
Nozzle holder
Overflow pipe assembly retaining nut
Glow plug
* Rocker arm bracket nut
* Cylinder head screw
* Fan drive pulley screw
* Connecting rod screw
* Flywheel screw
Bearing case cover screw
* Main bearing case screw 1
* Main bearing case screw 2
* Idle gear shaft 1 mounting screw
Oil pressure switch
NOTE
• For * marked screws, bolts and nuts on the table, apply engine oil to their threads and seats before
tightening.
• The letter "M" in Size × Pitch means that the screw, bolt or nut dimension stands for metric. The size is
the nominal outside diameter in mm or the threads. The pitch is the nominal distance in mm between two
threads.
Item N·m
98.1 to 137.2
123 to 147
17.7 to 20.5
19.6 to 29.4
6.9 to 8.8
24.5 to 34.3
49.0 to 68.6
34.3 to 39.2
19.6 to 24.5
7.8 to 14.7
21.6 to 26.5
63.7 to 68.6
235.4 to 245.2
41.2 to 46.1
53.9 to 58.8
9.8 to 11.3
29.4 to 34.3
49.0 to 53.9
9.8 to 11.3
14.7 to 19.6
1-S10
kgf·m ft-lbs
10.0 to 14.0 72.4 to 101.2
12.6 to 14.9 90.8 to 108.4
1.8 to 2.1 13.1 to 15.1
2.0 to 3.0 14.5 to 21.7
0.7 to 0.9 5.1 to 6.5
2.5 to 3.5 18.1 to 25.3
5.0 to 7.0 36.2 to 50.6
3.5 to 4.0 25.3 to 28.9
2.0 to 2.5 14.5 to 18.1
0.8 to 1.5 5.8 to 10.8
2.2 to 2.7 15.9 to 19.5
6.5 to 7.0 47.0 to 50.6
24.0 to 25.0 173.6 to 180.8
4.2 to 4.7 30.4 to 34.0
5.5 to 6.0 39.8 to 43.4
1.00 to 1.15 7.2 to 8.3
3.0 to 3.5 21.7 to 25.3
5.0 to 5.5 36.2 to 39.8
1.00 to 1.15 7.2 to 8.3
1.5 to 2.0 10.8 to 14.5
ENGINE
W1013236
KiSC issued 04, 2006 A