Kubota WSM F2880 Workshop Manual page 247

F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
Separating Hydraulic Cylinder Assembly
1. Remove the hydraulic cylinder assembly mounting screws and
nuts, and separate the hydraulic cylinder assembly (1).
(When reassembling)
Hydraulic cylinder
Tightening torque assembly mounting screw
and nut
(1) Hydraulic Cylinder Assembly
Control Valve
1. Remove the control valve mounting screws, and remove the
control valve (2).
(When reassembling)
• Take care not to damage the O-rings (1).
Control valve mounting
Tightening torque
screw
(1) O-ring
Disassembling Control Valve
1. Remove the spring pin (6) and snap ring (5).
2. Draw out the spool (4) with the spring (2).
(1) Snap Ring
(2) Spring
(3) Control Valve Body
7-S8
HYDRAULIC SYSTEM
39.2 to 44.1 N·m
4.0 to 4.5 kgf·m
28.9 to 32.5 ft-lbs
W1013253
23.6 to 27.4 N·m
2.4 to 2.8 kgf·m
17.4 to 20.2 ft-lbs
(2) Control Valve
W1013474
(4) Spool
(5) Snap Ring
(6) Spring Pin
W1013678
KiSC issued 04, 2006 A