pigtronix Infinity looper User Manual page 8

Toggle Switch Functions:
-- FULL / TRAIL / FADE --
Holding down the STOP MODE switch will choose
the way in which the loops stop when the STOP
footswitch is pressed.
FULL indicates that the audio will stop
immediately when you push the STOP footswitch.
TRAIL indicates that the audio will stop when it
reaches the end of the current loop cycle.
FADE indicates that the audio will steadily
decrease in volume until the end of the current
loop cycle.
All three stop modes obey the ARM setting and
will be applied to the armed loop only in this
mode.
When audio has been recorded on both Loop 1
and Loop 2, TRAIL and FADE stop modes will use
the length of Loop 2 as the master when the ALL
setting is selected.
-- INPUT SPLIT –
When INPUT SPLIT is OFF, both Loops record stereo
audio coming from IN 1 and IN 2
When INPUT SPLIT in ON, Loop 1 gets audio from IN
1 ONLY and Loop 2 gets audio from IN 2 ONLY.