pigtronix Infinity looper User Manual page 5

-- QUICK START GUIDE (continued) –
Press Loop 2 footswitch again to open an
overdub on Loop 2.
Press Loop 2 footswitch again to close the
overdub on Loop 2
Now Press Loop 1 footswitch to arm Loop 1.
Press Loop 1 footswitch again to open another
overdub on Loop 1.
Press Loop 1 footswitch again to close the new
overdub on Loop 1.
Press the STOP footswitch to halt playback on
both Loops.
Press and Hold the STOP footswitch to erase both
loops.
--
Press the SERIES MODE switch to put the Infinity
into Series mode.
Press Loop 1 footswitch to record (You must
record on Loop 1 first)
Press the Loop 2 footswitch. This will simultaneously
close Loop 1 and begin recording on Loop 2.
Press the Loop 1 footswitch. This will simultaneously
close Loop 2 and begin playback on Loop 1.
Press and Hold the STOP footswitch stop audio
and erase both loops.