pigtronix Infinity looper User Manual page 34

computer, it will appear as a USB mass storage
device.
Download the latest Firmware update
(fwupdate.dat) from the following URL:
Pigtronix.com/SPLfirmware
Open the drive that appears and double click on
the LOOPERFW directory. Copy the fwupdate.dat
file into the LOOPERFW directory, replacing the
current file of the same name.
Power down the Infinity Looper (eject first on
MAC) and then disconnect the USB cable from
the Infinity Looper.
WHILE HOLDING DOWN the INPUT SPLIT switch,
reconnect the power supply to the Infinity Looper,
the digit will display an "F" to indicate the
firmware update process has been initiated.
When finished, the Infinity will re-boot
automatically and your firmware will be updated.
If the "F" does not appear, then the firmware you
are trying to install is the same as what is currently
running on your device.