pigtronix Infinity looper User Manual page 11

installed in your Infinity Looper and the number of
preset slots you have assigned using the PC or
MAC application for the Infinity Looper. See the
table on the next page for maximum recording
times based on these factors.
-- SAVE / LOAD / COPY --
To Load a preset, turn the preset knob to select
the desired bank, the digit will flash. When you
have arrived at the desired destination, push
down the preset knob to enable that bank. To
cancel the load process at any time, hit the STOP
footswitch or simply turn the preset knob to return
to the currently loaded bank.
To Save a preset you have created, push and
HOLD the preset knob for 1 second, until the digit
begins flashing. Turn the preset knob to select the
bank you want to save the loops in and then
push down and HOLD the preset knob for 1
second to finalize the save. To cancel the save
process at any time, hit the STOP footswitch.
You cannot save loops to Preset "0" it is the
"blank canvas." If you try to save a loop to Preset
0, the digit will show you a "-" symbol, indicating
that you should turn the preset knob to save this
preset somewhere else.
The decimal point will illuminate to indicate that
audio is present in a Loop bank. When changes