pigtronix Infinity looper User Manual page 19

Press and Hold the SYNC MULTI switch to
toggle between the currently selected SYNC
MULTI value and non-SYNC. When none of the
SYNC MULTI LEDs are lit, the two loops are NOT
SYNCED.
Once SYNC MULTI is turned on, press the SYNC
MULTI switch quickly to cycle through the
different SYNC MULTI values.
If audio has already been recorded on Loop
2, you cannot change the SYNC MULTI value,
but you can press and hold the SYNC MULTI
switch to turn SYNC MULTI on and off.
Knobs:
MASTER VOLUME – This knob functions as a
stereo output control, determining the output
level of both loop audio and pass-through
audio.
When turned fully clockwise, the MASTER
VOLUME knob provides an overall boost of
approximately 3db.
PRESET – This is a rotary push button encoder
that is used to select what loop bank is in use
and to store loop audio.
LOOP VOLUME 1 - Sets the Loop 1 output
volume