pigtronix Infinity looper User Manual page 32

To update the Infinity Looper application on your
Infinity Looper, download the updated version at
the following URL: Pigtronix.com/SPLapplication
and replace the appropriate folder on the Infinity
Looper with the new version of the application.
Firmware Updates:
Automatic Firmware Update Using the Looper
Application:
In order to launch the Infinity Looper Application,
you must plug the looper into a PC using the
supplied USB-A to microUSB cable. The Infinity is
not a bus powered device and must be plugged
into the wall using the supplied adapter in order
to run the Infinity Looper Application.
Once the Infinity has been connected to a
computer, it will appear as a USB mass storage
device.
Open the drive that appears and double click on
the appropriate (MAC or PC) folder then double
click the Space Pig icon to launch the Infinity
Looper Application.
Make sure your computer has an active internet
connection.