1. Manuals
  2. Brands
  3. SIIG Manuals
  4. PCI Card
  5. Cyber 1S1P PCI
  6. Quick installation manual

SIIG Cyber 1S1P PCI Quick Installation Manual

High-speed serial i/o card
Hide thumbs Also See for Cyber 1S1P PCI:
Table of Contents

Advertisement

Quick Links

Download this manual
Introducing the Cyber 1S1P PCI
The Cyber 1S1P PCI high-speed serial I/O card provides
one 9-pin serial port and one parallel port.
Features and Benefits
•
Conforms to PCI v2.2 Plug and Play
•
Full support for Windows-based software
•
Reduces CPU load and improves system
performance dramatically
•
IRQ sharing feature reduces IRQ conflicts
•
High-speed serial port (9-pin) works with 56K V.90
external modems, ISDN terminal adapters, PDAs,
digital cameras, label printers and other serial port
devices
•
Built-in FIFO buffers dramatically increase data
transmit/receive speed, especially under Windows'
multitasking environment
•
Each serial port can be configured for either 5v or
12v output, for serial devices that require power
•
IEEE 1284 compliant SPP/EPP/ECP parallel port
System Requirements
•
Pentium or equivalent computer with an available
PCI slot
•
Windows 95/98/98SE/ME/NT 4.0/2000/XP/
Server 2003
04-0344A
Cyber 1S1P PCI

Quick Installation Guide

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cyber 1S1P PCI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SIIG Cyber 1S1P PCI

Summary of Contents for SIIG Cyber 1S1P PCI

  • Page 1: Quick Installation Guide

    Cyber 1S1P PCI Quick Installation Guide Introducing the Cyber 1S1P PCI The Cyber 1S1P PCI high-speed serial I/O card provides one 9-pin serial port and one parallel port. Features and Benefits • Conforms to PCI v2.2 Plug and Play • Full support for Windows-based software •...

  • Page 2: Package Contents

    Package Contents • (1) Cyber 1S1P PCI board • (1) Driver CD • (1) Quick Installation Guide Layout Serial Port Parallel Port Figure 1. Layout Jumper Settings (JP1) Open = 0 volts (default) Short 1-2 = 5v Short 2-3 = 12v Note: Most serial devices do not require additional power through the serial port.

  • Page 3: Hardware Installation

    Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer’s case for a few seconds.

  • Page 4: Software Installation

    Software Installation This section provides information on how to install the Cyber 1S1P PCI drivers. Windows 95 Driver Installation At the Update Device Driver Wizard window, click Next. Insert the driver CD, and click Other Locations. Type in D:\9x, click OK, then Finish. (Change D: to match your CD-ROM drive letter) From the Insert Disk window, click OK.
  • Page 5 Double click Ports (COM & LPT), CyberSerial PCI 16Cxxx..., Printer Port..., and CyberParallel PCI should be displayed. Double click Multi-function adapters, SIIG CyberPro 1S1P PCI board should be displayed. Windows NT 4.0 Driver Installation From the desktop click Start, then Run.
  • Page 6 Type in D:\NT4\Install_Parallel.exe, then click OK. (Change D: to match your CD-ROM drive letter) Repeat steps 3-5. Click Yes to restart Windows to complete the installation. To Verify Successful Installation In Windows NT 4.0: Go to Start / Settings / Control Panel, double click Ports device icon.
  • Page 7 To Verify Successful Installation In Windows 2000/XP/ Server 2003: Right click My Computer, click Manage, then select Device Manager. Double click Ports (COM & LPT), CyberSerial PCI 16Cxxx... andCyberParallel PCI... should be displayed. Double click Multifunction adapters, SIIG CyberPro 1S1P PCI board should be displayed.
  • Page 8 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 95/98/98SE/ME From the Device Manager window double click Ports (COM & LPT), then double click CyberSerial PCI...
  • Page 9 Changing Parallel Port Address (LPT) Some parallel devices need a specific parallel port in order to work. If your parallel device works properly, do not change this setting. Windows 95/98/98SE/ME From the Device Manager window double click Ports (COM & LPT), then double click CyberParallel PCI.
  • Page 10 Blank Page...

  • Page 11: Technical Support

    The 5-year manufacturer warranty supplied with this product is offered by SIIG, Inc. If you should happen to encounter any problems with this product, please follow the procedures below.
  • Page 12 Fremont, CA 94538-3152 Cyber 1S1P PCI is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective companies.

Table of Contents