Introduction; Change History; Required Software Version - Cisco Expressway CE1300 Installation Manual

Introduction

This guide describes how to install a CE1300 appliance into a video network, including how to prepare and
install the hardware, and how to do the basic initial configuration. It also provides some troubleshooting
suggestions.
Note
This chapter explains the following:
•
•
•
•
•

Change History

Table 1: Change History
Date
September 2023

Required Software Version

The CE1300 ships with pre-installed Expressway software. If you need to in future, you can upgrade the
pre-installed software to a later supported version. (If you want to check whether the Cisco Expressway has
the latest software installed, go to
The guide is for Cisco Expressway Series deployments only, as the appliance does not support the Cisco VCS
product.
Change History, on page 1
Required Software Version, on page 1
System Sizes Supported, on page 2
What's Different?, on page 2
More Information and Training, on page 3
C H A P T E R
Change
First Release
Updated content for Cisco
Expressway CE1300 Appliance
Installation Guide for X14.3.1
release
Software Download and navigate to the Cisco Expressway.)
Cisco Expressway CE1300 Appliance Installation Guide (X14.3.1)
1
Reason
Published with Expressway
X14.3.1 version
1