Setting The Pitch Eg; Pitch Eg Level Screen - Yamaha Reface DX Reference Manual

Setting the Pitch EG

The operators' pitches can be changed using an envelope. As with the normal EG, levels set the
degree to which the pitches are affected; rates set the rate of change. These values are common to
all operators.
+48
Level
0
-48
1.
Press the [EDIT] button to activate Edit mode.
2.
Press the [Pitch EG] button.
The Pitch EG Settings screen is displayed.
3.
If necessary, press the [Pitch EG] button several times to switch between this screen's pages.
4.
Set the envelope by using the sliders.
5.
When you have finished making settings, press the [EDIT] button once again to leave Edit mode.
PITCH EG Level screen (page 1)
1 2 3
1 Pitch EG Level 1
2 Pitch EG Level 2
3 Pitch EG Level 3
4 Pitch EG Level 4
Level 1
Rate 1 Rate 2
Key on
4
Adjust the Pitch EG levels.
-48 to 0 to +48 The standard pitch is represented by "0" , and you can adjust the pitch
upward and downward by 48 semitones (4 octaves).
Level 3
Level 2
Rate 3 Rate 4
Key off
Level 4
Time
reface Reference Manual
9