Acpi Configuration; Super Io Configuration - Nexcom nTUF 600 User Manual

Chapter 4: BIOS Setup

ACPI Configuration

This section is used to configure ACPI Settings.
BIOS SETUP UTILITY
Main
Advanced Chipset PCIPnP
ACPI Settings
Suspend mode [S1 (POS)]
ACPI APIC support [Enabled]
Options
S1 (POS)
S3 (STR)
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
Suspend Mode
Selects the ACPI state used for system suspend, S1 (POS) enables the Power
On Suspend function. S3 (STR) enables the Suspend to RAM function.
ACPI APIC support
Enables or disables the motherboard's Advanced Programmable Interrupt
Controller (APIC).
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
Exit
Security
Select the ACPI state used for
System Suspend
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit

Super IO Configuration

This section is used to configure the I/O functions supported by the onboard
Super I/O chip.
BIOS SETUP UTILITY
Main
Advanced Chipset
Configure Ite8783 Super IO Chipset
Serial Port1 Address
Serial Port1 IRQ
Serial Port1 Frequency Mode
Serial Port1 Frequency selec
Serial Port2 Address
Serial Port2 IRQ
Serial Port2 Frequency Mode
Serial Port2 Frequency selec
Serial Port3 Address
Serial Port3 IRQ
Serial Port3 Frequency Mode
Serial Port3 Frequency selec
Serial Port4 Address
Serial Port4 IRQ
Serial Port4 Frequency Mode
Serial Port4 Frequency selec
Serial Port5 Address
Serial Port5 IRQ
Serial Port6 Address
Serial Port6 IRQ
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
Serial Port1 Address to Serial Port6 Address
Auto
The system will automatically select an I/O address for the onboard serial
port.
3F8, 2F8, 3E8, 2E8, 2F0, 2E0
Allows you to manually select an I/O address for the onboard serial port.
Disabled
Disables the onboard serial port.abled Disables the onboard serial port.
71
Exit
PCIPnP Security
Allows BIOS to Select Serial
Port1 Base Addresses.
[3F8]
[4]
[RS422]
[115200 bps]
[2F8]
[3]
[RS422]
[115200 bps]
[3E8]
[5]
[RS422]
← Select Screen
[115200 bps]
↑↓ Select Item
[2E8]
+/- Change Field
[7]
Tab Select Field
F1 General Help
[RS422]
F10 Save & Exit
[115200 bps]
ESC Exit
[2F0]
[10]
[2E0]
[11]
nTUF 600 User Manual