Set Max Volume Out; Set Restore Default - Cary Audio Design Cinema 12 Owner's Manual

SETUP MENU
when you wish to watch a movie in surround sound when you do not wish to
bother others by the level of the volume.
TO SET MAX VOLUME OUT
1. Please follow steps 1 through 3 from the "to set password" instruction above to
reach the "ADVANCED SETTINGS" menu.
2. Once you have entered the "ADAVANCED SETTINGS" menu, press the
button on the remote until you reach "MAX VOLUME OUT" on the front panel
display. The "ADVANCED SETTINGS / MAX VOLUME OUT......0dB" menu
appears on the front panel display.
3. Use the and buttons on the remote to adjust the Max Volume output from 0dB
to +15dB. This is the preset Max Volume output level that the unit will power on
to and default to upon switching to a new input for the first time after power on.
TO SET RESTORE DEFAULT
1. Please follow steps 1 through 3 from the "to set password" instruction above to
reach the "ADVANCED SETTINGS" menu.
2. Press the button on the remote until you reach "Restore Default" on the front
panel display.
3. Press the OK button on the remote to run the "Restore Default" system restore.
NOTE: When the processor is reset, you will lose all of your settings.
When you are finished with the reset, the following will appear on the display:
Restore Default OK
4. Press the button on the remote to select "GOTO MAIN MENU" then press the
OK button to return to the "ADVANCED SETTINGS" menu, or simply press the
SETUP button to exit the "SETUP MENU" completely.
66