Set Distance; Set Balance - Cary Audio Design Cinema 12 Owner's Manual

AUTO SOUND SETUP
Press OK now.
Note: The speaker check measures the state of use of all speakers whether they
are actually used or not. For example, if the CEN speaker is not used, the test
tone will require time to go from the FL to the FR; therefore, be careful not to
unplug the microphone or operate the Cinema 12 during this time.
7. When the speaker check ends, the following appears on the VFD front panel
display:
Total: 8 speakers (or however many speakers are connected)
Press OK now
The results of the speaker check will be displayed. The front panel shows
confirmation of the number of speakers detected. If some speakers are not
detected, make sure that they are all connected properly. After confirming the
total number of speakers, press the OK button.

8. Set Distance

During the Set Distance testing, the following appears on the VFD front panel
display and checks are made to detect dart sound in the listening room (whether
there are speakers connected to each channel or not) and the polarity of the
speakers as they are connected.
Set Distance
FL........................ 0.0ft 0.00m
CEN..................... 0.0ft 0.00m
FR........................ 0.0ft 0.00m
SR........................ 0.0ft 0.00m
SBR ..................... 0.0ft 0.00m
SBL ..................... 0.0ft 0.00m
SL........................ 0.0ft 0.00m
SW....................... 0.0ft 0.00m

9. Set Balance

During Set Balance testing, the following appears on the VFD front panel display
and checks are made to detect the test sound in the listening room (whether there
are speakers connected to each channel or not) and the polarity of the speakers as
they are connected.
Set Balance
FL.................................0.0dB
CEN..............................0.0dB
FR.................................0.0dB
SR.................................0.0dB
SBR ..............................0.0dB
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
-15.0dB to + 15.0dB
-15.0dB to + 15.0dB
-15.0dB to + 15.0dB
-15.0dB to + 15.0dB
-15.0dB to + 15.0dB
36