Cary Audio Design Cinema 12 Owner's Manual page 43

MANUAL SOUND SETUP
display.
2. Press the OK button on the remote to enter the "LISTENING PROFILES" setup
menu.
The "LISTENING PROFILES / MEMORY 1 menu appears on the front panel
display.
3. Press the OK button on the remote to enter the "MOVIE MODE / Set Speaker
Config" settings menu.
The "MOVIE SPK Setting / Set Speaker Config" menu appears on the front panel
display.
4. Press the button until you reach SET DISTANCE on the front panel display.
The "MOVIE SPK Setting / Set Distance" menu appears on the front panel
display.
5. Press the OK button on the remote to enter the SET DISTANCE setup menu.
The "FL ........0.0ft 0.0m" menu appears on the front panel display.
6. Use the and
by setting the measured distance.
7. To set the distance for each speaker within your system, you will need to measure,
as precisely as possible, the distances from your chosen listening/viewing position
to the various loudspeakers within your system.
Set the distance for the FL speaker to the nearest foot/meter. Rounding up is OK.
Distances can be set in the following increments:
- Feet 0 - 100 ft in 1 foot increments. Meters 0 to 30.3 meters in 0.3 meter
increments.
- You can scroll in either direction using the and
8. Press the button on the remote when you have completed your distance
selection for the Front Left speaker. Repeat steps 5 and 6 for the Center, Front R,
Side R, Surr BR, Surr BL, Side L and Subwoofer speaker.
9. Press the button on the remote to select BACK within the menu then press OK
to return to the previous "SETUP MENU" to continue through the system setup
process, or simply press the SETUP button to exit the "SETUP MENU"
completely.
buttons on the remote to adjust the FL (front left) distance delays
41
buttons on the remote.