Zone 2; Set Zone 2 Input; Set Zone 2 Volume - Cary Audio Design Cinema 12 Owner's Manual

SETUP MENU

ZONE 2

Cinema 12's front panel and main remote handset can control ZONE 2 output sources and
volume control in the SETUP MENU.
- Zone 2
- Zone 2 input
- Zone 2 volume
TO SET ZONE 2 INPUT FROM THE MAIN ZONE REMOTE
1. Press the SETUP button on the remote to enter the "SETUP MENU".
The "SETUP MENU / LISTENING PROFILES" menu appears on the front panel
display.
2. Press the button on the remote until you reach "ZONE 2" on the front panel
display.
The "SETUP MENU / ZONE 2" menu appears on the front panel display.
3. Press the ENTER button on the remote to enter the "ZONE 2" setup menu.
The "ZONE 2 / ZONE 2 Input....INPUT 1" menu appears on the front panel
display.
4. Use the and
You can select INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6,
INPUT 7, INPUT 8, 7.1CH ( L & R ONLY) FM, AM, HDFM, HDAM, HDMI 1,
HDMI 2, HDMI 3 AND HDMI 4.
5. Press the button on the remote to reach "GOTO MAIN MENU". Once this
appears on the front panel display, press the OK button on the remote to return to
the SETUP menu or press the SETUP button to simply exit the SETUP MENU
completely.
TO SET ZONE 2 VOLUME FROM THE MAIN ZONE REMOTE
1. Press the SETUP button on the remote to enter the "SETUP MENU".
The "SETUP MENU / LISTENING PROFILES" menu appears on the front panel
display.
2. Press the button on the remote until you reach "ZONE 2" on the front panel
display.
The "SETUP MENU / ZONE 2" menu appears on the front panel display.
buttons on the remote to select a Zone 2 input source.
57