Speaker Check; Set Distance; Set Balance - Cary Audio Design Cinema 11 Owner's Manual

AUTO SOUND SETUP

Speaker check

FL ......................................Yes
CEN ...................................Yes
FR......................................Yes
SR .....................................Yes
SBR....................................Yes
SBL ....................................Yes
SL ......................................Yes
SW.....................................Yes
Total: 8 speakers
Press ENTER now.
Note: The speaker check measures the state of use of all speakers whether actually
used or not. For example, if the CEN speaker is not used, the test tone will require
time to go from the FL to the FR, therefore be careful not to unplug the microphone or
operate the Cinema 11 during this time.
6. When the speaker check ends, the following VFD appears on the display.
Total: 8 speakers (or however many speakers are connected)
Press ENTER now
The results of the speaker check will be displayed. The front panel shows confirmation of
the number of speakers detected. If some speakers are not detected, make sure that
they are all connected properly. After confirming the total number of speakers, press the
ENTER button.

7. Set Distance

During Set Distance testing, the following VFD appears on the display and checks are
made to detect dart sound in the listening room, whether there are speakers connected
to each channel or not and the polarity of the speakers as they are connected.
Set Distance
FL .......................... 0.0ft 0.00m
CEN ....................... 0.0ft 0.00m
FR.......................... 0.0ft 0.00m
SR ......................... 0.0ft 0.00m
SBR........................ 0.0ft 0.00m
SBL ........................ 0.0ft 0.00m
SL .......................... 0.0ft 0.00m
SW......................... 0.0ft 0.00m

8. Set Balance

During Set Balance testing, the following VFD appears on the display and checks are
made to detect the test sound in the listening room, whether there are speakers
connected to each channel or not and the polarity of the speakers as they are connected.
(Yes/No)
(Yes/No)
(Yes/No)
(Yes/No)
(Yes/No)
(Yes/No)
(Yes/No)
(Yes/No)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
(0.0ft to 100ft/ 0.00m to 30.3m)
25