Zone 1 Master Volume; Zone 2 Master Volume; Cd Pure Audio - Cary Audio Design Cinema 12 Owner's Manual

SETUP MENU
Z1 MASTER VOLUME
1. Please follow steps 1 through 3 from the "to set password" instruction above to
reach the "ADVANCED SETTINGS" menu.
2. Once you have entered the "ADVANCED SETTINGS" menu, press the
on the remote until you reach "Z1 MASTER VOLUME" on the front panel
display. The "ADVANCED SETTINGS / Z1 MASTER VOLUME......-30dB"
menu appears on the front panel display.
3. Use the and buttons on the remote to adjust the Master Volume from -90dB to
+15dB. This is the preset Master Volume level that the unit will power on to and
default to upon switching to a new input for the first time after power on.
Z2 MASTER VOLUME
1. Please follow steps 1 through 3 from the "to set password" instruction above to
reach the "ADVANCED SETTINGS" menu.
2. Once you have entered the "ADVANCED SETTINGS" menu, press the
button on the remote until you reach "Z2 MASTER VOLUME" on the front panel
display. The "ADVANCED SETTINGS / Z2 MASTER VOLUME......-30dB"
menu appears on the front panel display.
3. Use the and buttons on the remote to adjust the Master Volume from -90dB to
+15dB. This is the preset Master Volume level that the unit will power on to and
default to upon switching to a new input for the first time after power on.

CD PURE AUDIO

The Cinema 12 allows CD Digital sources (44.1kHz) to select either Pure Audio
"On" or "Off" mode. When you select the "On" mode, the Cinema 12 passes
digital input signals directly to the D/A converter output connectors with no
EQing or Sub output. When you select "Off" mode, the Cinema 12 sends digital
input signals through the DSP audio processor and internal processing before
passing them to the D/A converter output connectors. This allows digital sources
to use bass management, speaker crossovers, speaker distance calibration, and
Room EQ.
1. Please follow steps 1 through 3 from the "to set password" instruction above to
reach the "ADVANCED SETTINGS" menu.
2. Once you have entered the "ADVANCED SETTINGS" menu, press the
button on the remote until you reach "CD Pure Audio" on the front panel display.
60
button