12. Set Speaker Phase - Cary Audio Design Cinema 12 Owner's Manual

AUTO SOUND SETUP

12. Set Speaker Phase

During Set Speaker Phase testing, the following appears on the VFD front panel
display and checks are made to detect the test sound in the listening room
(whether there are speakers connected to each channel or not) and the polarity of
the speakers as they are connected.
Set Speaker Phase
FL.............................. Inphase
CEN........................... Inphase
FR.............................. Inphase
SR.............................. Inphase
SBR ........................... Inphase
SBL ........................... Inphase
SL.............................. Inphase
SW............................. Inphase
Storing Measurement Results in SETUP MENU
If the Cinema 12 senses that a speaker is out of phase, the VFD front panel
display will show the following sentence:
OUT PHASE SPK
___ ___ ___
The Cinema 12 can automatically adjust the speakers listed as Out of Phase to
being properly in phase and will go to the next step.
- Press OK to store the settings and return to the "Setup Menu".
Press the OK button on the remote to store all parameters including the equalizer
parameters in the "SETUP MENU". If you do not want to store the calculated
results in the "SETUP MENU", press the AUTO SETUP button to exit.
Inphase / Outphase
Inphase / Outphase
Inphase / Outphase
Inphase / Outphase
Inphase / Outphase
Inphase / Outphase
Inphase / Outphase
Inphase / Outphase
38