Advanced Settings - Cary Audio Design Cinema 12 Owner's Manual

SETUP MENU
3. Press the OK button on the remote to enter the "ZONE 2" setup menu.
The "ZONE 2 / ZONE 2 Input....INPUT 1" menu appears on the front panel
display.
4. Press the button on the remote until you reach the "ZONE 2 Volume" menu.
The "ZONE 2 / ZONE 2 Volume....-30dB" menu appears on the front panel
display.
5. Use the and
You can adjust the Zone 2 volume level from -90dB to +15dB.
6. Press the button on the remote to reach "GO TO MAIN MENU". Once this
appears on the front panel display, press the OK button on the remote to return to
the ZONE 2 menu or press the SETUP button to simply exit the SETUP MENU
completely.

ADVANCED SETTINGS

The settings within the ADVANCED SETTINGS menu are as follows:
Password ..........................Off / On / Change
Z1 Master Volume......................-30dB
Z2 Master Volume......................-30dB
CD Pure Audio.......................Off / On
HDMI Audio Out.............Off / On
AV SYNC Delay..............Off / 1-100ms (1 ms = approx. 1 foot or 1/3 meter)
Bright ...............................High / Mid / Low / Off
Edit Custom Name
IR Controls.......................Front / Rear / Both
Zone 2 IR Controls...........Front / Rear / Both
Rear IR Mode...................Normal / Invert
Zone 2 IR Mode ...............Normal / Invert
TRIGGER 1 .....................Off / Zone 1 / Zone 2
TRIGGER 2 .....................Off / Zone 1 / Zone 2
TRIGGER 3 .....................Off / Zone 1 / Zone 2
Auto Input Seek ...............Off / On
Late ..................................Off / Half / Full (Dolby Digital only)
Max Volume Out...................0
Restore Default ................Restore Default / Restore Default OK!
buttons on the remote to select the Zone 2 output volume.
58