Set Distance - Cary Audio Design Cinema 12 Owner's Manual

MANUAL SOUND SETUP
• For SBR (Surround Back Right) you can select Yes or No. Select No when
the speaker setup does not include surround rear R speaker. The Cinema 12
then redirects surround rear R channel signals to the side R output
connectors.
• For SBL (Surround Back Left) you can select Yes or No. Select No when
the speaker setup does not include surround rear L speaker. The Cinema 12
then redirects surround rear L channel signals to the side L output
connectors.
• For SL (Surround Left) you can select Yes or No. Select No when the
speaker setup does not include side L speaker. The Cinema 12 then redirects
side L channel signals to the front L output connectors.
• For SW (Subwoofer) you can select Yes or No. Select No when the speaker
setup does not include SW speaker. The Cinema 12 then redirects SW
channel signals to the front L/R output connectors.
7. Press the button on the remote to select BACK within the menu then press OK
to return to the previous "SETUP MENU" to continue through the system setup
process, or simply press the SETUP button to exit to "SETUP MENU"
completely.

SET DISTANCE

The DISTANCE SETUP is used to enter speaker distances (for proper sound delay).
Setting the Speaker Distance Delays
Setting the speaker delay is crucial to the proper performance of any surround decoder
component like the Cinema 12. Your home theater system will not perform properly if
this process is not completed.
To accomplish this process, you will need a tape measure or other means of determining
the distance from each speaker to the primary listening position. Measure the distance
from the main listening point to each speaker. Front R, Side R, Surr BR, Surr BL, Side L
and Subwoofer speaker.
Write the measured distances down before beginning the Distance Setup.
NOTE: The following selected menus appear on the Cinema 12 Display:
MOVIE SPK Setting
Set Distance
To set the speaker distance delays for your speakers:
1. Press the SETUP button to enter the SETUP MENU.
The "SETUP MENU / LISTENING PROFILES" menu appears on the front panel
40