Unpacking And Installation - Cary Audio Design Cinema 12 Owner's Manual

WELCOME
• RS-232 connector for flash memory software upgrades and configuration tool
downloads
• Optical digital audio output connector for Zone 2 (TOSLINK)
• 3 12 volt output connections with 1/8" mini plug connectors
• 2 IR input connections
• 1/8" mini plug microphone input connector
• 7.1 Balanced audio output connectors for Main Zone
• HD Radio Tuner in addition to AM/FM

UNPACKING AND INSTALLATION

This section describes the proper unpacking and installation procedures for your new
component.
Unpacking
All Cary Audio Design shipping cartons have been specially designed to protect their
contents and special care has been taken to prevent damage under normal shipping
conditions. Mishandling should be evident upon inspection of the shipping container. If
shipping damage is found after visual inspection, take care not to destroy the evidence. If
necessary, document the damage with photographs and contact the transport carrier
immediately.
Carefully remove your new component from its packing carton and examine it closely for
signs of shipping damage. We strongly recommend saving all original packing cartons to
protect your component from damage should you wish to store it or ship it at a later date.
In the Box
When unpacking your Cinema 12 processor, make sure the following accessories are
included. You should find the following items within the box:
• Power Cable
• (x2) Remote Controls (batteries already installed)
• Owner's Manual
• Microphone and cable
• Warranty Card
8