Set Password - Cary Audio Design Cinema 12 Owner's Manual

SETUP MENU
TO SET PASSWORD
Setting a password allows you to keep settings from being changed by visitors, children
or others curious about your Cinema 12.
1. Press the SETUP button on the remote to enter the "SETUP MENU".
The "SETUP MENU / LISTENING PROFILES" menu appears on the front panel
display.
2. Press the button on the remote until you reach "ADVANCED SETTINGS" on
the front panel display.
The "SETUP MENU / ADVANCED SETTINGS" menu appears on the front
panel display.
3. Press the OK button on the remote to enter the "ADVANCED SETTINGS"
menu.
The "ADVANCED SETTINGS / Password" menu appears on the front panel
display.
4. Press the OK button on the remote to enter the "PASSWORD MODE" menu.
The "Password / Password Mode.....Off" menu appears on the front panel
display.
5. Use the and
If you select the ON mode, you will have to key in the password the next time you
enter the SETUP menu. The Default, Preset Password from the factory is 0, 0, 0,
0.
6. Press the button on the remote to select the "PASSWORD CHANGE" mode.
The "Password / Change" menu appears on the front panel display.
7. Press the OK button on the remote to enter the "ENTER OLD PASSWORD"
menu. Key-in the factory preset password (password preset 0, 0, 0, 0). The
following will be displayed on front panel as you enter password: *, *, *, *,. Next,
enter the new password you have chosen: _, _, _, _, The Cinema 12 will then ask
you to re-enter your new password:_,_,_,_. If properly completed, "Password
set!" will be displayed on the front panel display.
8. Press the button on the remote to reach "BACK" then press the OK button on
the remote to return to the "PASSWORD" menu, or press the SETUP button on
the remote to exit the "SETUP MENU" completely.
button on the remote to select the "OFF" or "ON" mode.
59