Cary Audio Design Cinema 12 Owner's Manual page 24

CONTROLS AND DISPLAYS
The 3 triggers operate independently. They can be set to off, or zone 1 or 2.
9. IR INPUT
• Use the Z1 and Z2 remote jacks to connect external IR sensors. When the unit is
installed where it is not otherwise visible to the remote, connect an optional,
external sensor and mount it outside the cabinet.
10. AUTO SETUP MIC-IN
• Use to connect the supplied microphone for Auto Setup and Auto Room EQ
features.
11. RS-232 PORT
• The RS-232 port is used in conjunction with an external controller to control the
operation of the Cinema 12. (custom installation use only)
12. ZONE 2 DIGITAL AUDIO OUT (TOSLINK OPTICAL)
• This jack supplies the digital audio outputs to an external surround sound
processor used to power the speakers in the remote zone. Output is stereo LCPM
or 5.1 surround
13. DIGITAL INPUT (INPUTS 2 THROUGH 8) TOSLINK OPTICAL
• The digital inputs accept digital audio signals from CD players, DVD players or
other digital source components.
14. DIGITAL INPUT (INPUTS 2 THROUGH 8) RCA COAXIAL
• The digital inputs accept digital audio signals from CD players, DVD players or
other digital source components.
15. DIGITAL INPUT (INPUT 1) XLR
• This balanced digital input accepts digital audio signals from CD players, DVD
players or other balanced digital source components.
16. HDMI Output Connector
• Used to connect the Cinema 12 to a TV or projector with an HDMI input.
22