Change Input Names - Cary Audio Design Cinema 12 Owner's Manual

SETUP MENU
6. Press the button on the remote when you have made a selection.
Repeat steps for Input 1, Input 2, Input 3, Input 4, Input 5, Input 6, Input 7 & Input
8.
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
7. When you have finished setting the assigned inputs for all of the inputs within your
system, press the
to the previous "SETUP MENU" to continue through the system setup process, or
simply press the SETUP button to exit the "SETUP MENU" completely.

CHANGE INPUT NAMES

You can customize the name of the selected input. Custom Input Names can include up to
twelve characters. For example: DVD 7 or DVD 8 for Input 2.
NOTE: The following selected menus appear on the Cinema 12 Display.
SETUP MENU
INPUTS
To change input names:
1. Press the SETUP button on the remote to enter the "SETUP MENU".
The "SETUP MENU / LISTENING PROFILES" menu appears on the front
panel.
2. Press the button on the remote until you reach "INPUTS" on the front panel
display.
The "SETUP MENU / INPUT" menu appears on the front panel display.
3. Press the OK button on the remote to enter the "INPUTS" setup menu.
The "INPUTS / Assigned Inputs" menu appears on the front panel display.
4. Press the button on the remote until you reach the "CHANGE INPUT
NAMES" setup menu.
The "INPUTS / Change Input Names" menu appears on the front panel display.
XLR digital / XLR Analog
Toslink 2 / Coaxial 2 / Analog 2
Toslink 3 / Coaxial 3 / Analog 3
Toslink 4 / Coaxial 4 / Analog 4
Toslink 5 / Coaxial 5 / Analog 5
Toslink 6 / Coaxial 6 / Analog 6
Toslink 7 / Coaxial 7 / Analog 7
Toslink 8 / Coaxial 8 / Analog 8
button on the remote to select BACK, then press OK to return
50