Storage Configuration - Nexcom NEX 883 User Manual

Chapter 3: Uefi Setup Utility

3.3.4 Storage Configuration

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main
Advanced Chipset
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Hard Disk S.M.A.R.T [Disabled]
SATA3_0 :Not Detected
SATA3_1 :Not Detected
SATA3_2 :Not Detected
SATA3_3 :Not Detected
MINI_SATA1 :Not Detected
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
SATA Controller(s)
Use this item to enable or disable the SATA Controller feature.
SATA Mode Selection
Use this to select SATA mode. Configuration options: [IDE Mode], [AHCI
Mode]and [RAID Mode]. The default value is [IDE Mode].
AHCI (Advanced Host Controller Interface) supports NCQ and
other new features that will improve SATA disk performance but
IDE mode does not have these advantages.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
Exit
PCIPnP Security
Enable or disable SATA
Device
.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save & Exit
F12: Print Screen
ESC: Exit
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analy-
sis, and Reporting Technology) feature. Configuration options: [Disabled]
and [Enabled].
32
NEX 883 User Manual