Storage Configuration - Nexcom NEX 980 User Manual

Chapter 3: UEFI Setup Utility

3.3.4 Storage Configuration

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced H/M Monitor
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Hard Disk S.M.A.R.T [Disabled]
SATA3_0 Not Detected
SATA3_1 Not Detected
SATA3_2 Not Detected
SATA3_3 Not Detected
MINI_SATA1 Not Detected
CFAST1 Not Detected
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Boot Security
Enabled or Disable SATA Device.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Controller(s)
Use this item to enable or disable the SATA Controller feature.
SATA Mode Selection
Use this to select SATA mode. Configuration options: [IDE Mode], [AHCI
Mode] and [RAID Mode]. The default value is [IDE Mode].
AHCI (Advanced Host Controller Interface) supports NCQ and
other new features that will improve SATA disk performance
but IDE mode does not have these advantages.
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology) feature. Configuration options: [Disabled] and
[Enabled].
27
NEX 980 User Manual