Installing Or Replacing A Tape Drive - Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual

5. Remove the two screws that secure the solid-state drive.
Figure 91. Removing the screws that secure the solid-state drive
6. Lift the solid-state drive up to remove it from the drive adapter.
Figure 92. Removing the solid-state drive from the drive adapter
7. Install a new solid-state drive. See "Installing a 2.5-inch solid-state drive into a 3.5-inch hard-disk-drive
bay" on page 144.
8. If you are instructed to return the old solid-state drive, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To configure RAID, go to "Configuring RAID" on page 72.
• To complete the installation, go to "Completing the parts replacement" on page 200.

Installing or replacing a tape drive

This topic contains the following items:
• "Installing or replacing an internal RDX drive" on page 153
152
ThinkServer TD340 User Guide and Hardware Maintenance Manual