System Board Components - Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual

The following table provides information about the recommended power connector and system board SATA
connector for the non-hot-swap hard disk drive installed in each drive bay. See "Server components" on
page 28 and "System board components" on page 48 for the location information about the hard disk drive
bays and SATA connectors on the system board.
Non-hot-swap hard disk drive
Installed in bay 0
Installed in bay 1
Installed in bay 2
Installed in bay 3

System board components

The following illustration shows the component locations on the system board.
Figure 29. System board components
1
System fan 3 connector
2
Microprocessor socket 2
3
Microprocessor 2 fan connector
4
Microprocessor 2 power connector
5
Memory slots (6)
6
Main power connector
7
Power Management Bus (PMBus) connector
8
Microprocessor socket 1
48
ThinkServer TD340 User Guide and Hardware Maintenance Manual
Power connector
P9 power connector
P10 power connector
P7 power connector
P8 power connector
21
SATA connector 4
22
SAS connector 4-7
23
SAS connector 0-3
24
Internal USB Type A connector
25
TMM Premium connector
26
TPM connector
27
Intelligent Diagnostics Module connector
28
Front panel connector
System board SATA connector
SATA connector 0
SATA connector 1
SATA connector 2
SATA connector 3