Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual page 167

• If you are replacing an RDX drive, disconnect the signal cable and the power cable from the rear
of the RDX drive. Press the release button
from the rear until it is projected from the front of the chassis. Then, hold the RDX drive from the
front and completely slide it out of the chassis.
Figure 94. Removing the RDX drive
5. Touch the static-protective package that contains the new RDX drive to any unpainted surface on the
outside of the server. Then, take the new RDX drive and the signal cable out of the package.
1 in the direction as shown and push the RDX drive
U
C P
M
M E
U
P S
.
Chapter 6 Installing, removing, or replacing hardware
155