Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual page 75

Notes:
• Enabled means that the function is configured.
• Disabled means that the function is not configured.
The Advanced menu contains the following submenus. For more information, enter the corresponding
submenu and refer to the instructions on the screen.
• Chipset Configuration: View and set chipset configuration parameters.
• Processor Configuration: View information about the installed microprocessors and set microprocessor
configuration parameters.
• Memory Configuration: View information about the installed memory modules and set memory
configuration parameters.
• ACPI Configuration: View and set ACPI configuration parameters.
• SATA/SAS Configuration: View information about the installed SATA or SAS devices and set SATA or
SAS configuration parameters.
• PCI/PCIE Configuration: View and set PCI or PCI Express configuration parameters.
• USB Configuration: View and set USB configuration parameters, such as enabling or disabling USB
devices.
• Serial Configuration: View and set configuration parameters for the serial connector and serial connector
console redirection.
• Network Setup: View and set configuration parameters for the UEFI network boot function.
Security menu
You can set passwords and configure the TPM function on the Security menu in the Setup Utility program.
For each menu item, press Enter to show selectable options and select a desired option by using the up and
down arrow keys or type desired values from the keyboard. Some items are displayed on the menu only if
the server supports the corresponding features.
Notes:
• Enabled means that the function is configured.
• Disabled means that the function is not configured.
The Security menu contains the following items:
• Administrator Password: Set an administrator password to protect against unauthorized access to
your server. See "Using passwords" on page 65.
• User Password: Set a user password to protect against unauthorized access to your server. See "Using
passwords" on page 65.
• TPM/TCM: Configure the TPM function if your server has a TPM installed in the TPM connector on the
system board. See "Configuring the TPM function" on page 66.
Server Management menu
You can view system information and view or change event log and BMC settings on the Server
Management menu in the Setup Utility program. On each submenu, press Enter to view the information or
show selectable options and select a desired option by using the up and down arrow keys. Some items are
displayed on the menu only if the server supports the corresponding features.
The Server Management menu contains the following submenus. For more information, enter the
corresponding submenu and refer to the instructions on the screen.
• BMC Firmware Revision: View the BMC version.
.
Chapter 5 Configuring the server
63