Lenovo 70B4 User Manual And Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. 70B4
  6. User manual and hardware maintenance manual
Lenovo 70B4 User Manual And Hardware Maintenance Manual

Lenovo 70B4 User Manual And Hardware Maintenance Manual

Machine types: 70b4, 70b5, 70b6, and 70b7
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Machine Types:

Advertisement

Table of Contents
loading

Related Manuals for Lenovo 70B4

Summary of Contents for Lenovo 70B4

  • Page 1 Machine Types:...
  • Page 2 Note: Read Me First Third Edition (May 2014) © Copyright Lenovo 2014.

  • Page 3: Table Of Contents

    Contents Safety information ..Chapter 1. General information ..1 Chapter 2. Server setup road map . . . 5 Chapter 3. Product overview ..7 Chapter 6.
  • Page 4 Chapter 8. Getting information, help, and service ... . . Appendix A. Notices ..Chapter 7. Troubleshooting and Index....diagnostics .

  • Page 5: Safety Information

    Safety information Note: 製品をご使用になる前に、製品に付属の Documentation DVD に収録されているマルチリンガルの「安 全に正しくご使用いただくために」を読んで理解してください。 제품을 사용하기 전에 제품과 함께 제공되는 문서 DVD의 다국어 안전 지침을 주의 깊게 읽어보십시오.
  • Page 6 在使用本产品之前，请务必先阅读和了解产品附带的文档 DVD 中的多语言安全说明。 使用本產品之前，請務必閱讀並瞭解產品隨附的文件 DVD 上的多國語言版本安全資訊。 Important: Safety, Warranty, and Support Information...
  • Page 7 Statement 1 DANGER Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. Connect all power cords to a properly wired and grounded electrical outlet. Ensure that all power cord connectors are securely and completely plugged into receptacles.
  • Page 8 Statement 3 CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. •...
  • Page 9 Statement 6 CAUTION: If you install a strain-relief bracket option over the end of the power cord that is connected to the device, you must connect the other end of the power cord to a power source that is easily accessible in case it needs to be disconnected.
  • Page 10 Statement 11 CAUTION: The following label indicates a potential heat hazard. Statement 12 DANGER Overloading a branch circuit is a potential fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed branch current ratings at the installation site.
  • Page 11 Statement 16 CAUTION: To reduce the risk of electric shock or energy hazards: • This equipment must be installed by trained service personnel in a restricted-access location, as defined by your local electrical code and the latest edition of IEC 60950. •...
  • Page 12 Statement 20 CAUTION: A lithium ion battery is provided. To avoid possible explosion, do not burn the battery. Replace the battery only with the Lenovo-approved part. Recycle or discard the battery as instructed by local regulations. Products that are not assessed...

  • Page 13: Chapter 1. General Information

    Chapter 1. General information Introduction ThinkServer EasyStartup...

  • Page 14: Server Documentation

    Product name Machine type and model (MT-M) Serial number (S/N) Date of purchase Server documentation Printed document Read Me First Documentation DVD...
  • Page 15 Note: Safety, Warranty, and Support Information Lenovo License Agreement User Guide and Hardware Maintenance Manual ThinkServer Management Module User Guide Note: MegaRAID SAS Software User Guide Note:...

  • Page 17: Chapter 2. Server Setup Road Map

    Chapter 2. Server setup road map...

  • Page 19: Chapter 3. Product Overview

    Chapter 3. Product overview Server package Note: Figure 1. Server package Features...
  • Page 20 Microprocessor Memory Power supply System fans Internal drives Note: Note:...
  • Page 21 Note: Note: External drives Expansion slots Input/Output (I/O) features Video subsystem Ethernet connectivity...
  • Page 22 Reliability, availability, and serviceability Security features Note: Basic system management features ThinkServer Management Module User Guide...
  • Page 23 Advanced system management features ThinkServer Management Module User Guide...
  • Page 24 Specifications Dimensions Weight Environment Electrical input Software ThinkServer EasyStartup ThinkServer EasyStartup ThinkServer EasyUpdate Firmware Updater...
  • Page 25 BIOS and TMM update utilities RAID configuration utilities Lenovo ThinkServer EasyManage Remote management software ThinkServer Management Module User Guide Diagnostic program Locations Machine type, model, and serial number label...
  • Page 26 Note: Figure 2. Machine type, model, and serial number labels...
  • Page 27 Front view of the server Figure 3. Front view of the server Front panel Optical drive bay 2...
  • Page 28 Optical drive bay 1 Optical drive eject/close button Optical drive status LED Front door Front door lock Front door handle Intelligent diagnostics module panel...

  • Page 29: Front Panel

    Front panel Note: Figure 4. Front panel Power switch with power status LED...
  • Page 30 Power status LED Color Description Hard disk drive status LED Note: Hard disk drive status LED Description Color NIC 1 status LED NIC 2 status LED NIC status LED Color Description System error LED Amber Potential system error (system error LED: amber) Solution Note:...
  • Page 31 Potential system error (system error LED: amber) Solution Front USB connector 1 Front USB connector 2 Intelligent diagnostics module Note:...
  • Page 32 Note: Figure 5. IDM panel Status Description Action...
  • Page 33 Status Description Action Note: Note: Rear view of the server...
  • Page 34 Note: Figure 6. Rear view of the server with a non-hot-swap power supply assembly...
  • Page 35 Figure 7. Rear view of the server with hot-swap redundant power supplies Power cord connectors Serial connector USB connectors...
  • Page 36 Ethernet connectors (RJ-45) Note: Figure 8. Ethernet status LEDs Ethernet status LED Description Color Status VGA DB-15 connector ID LED ID LED Description Color Expansion card area...
  • Page 37 Expansion card installation guidelines Notes: Table 1. ThinkServer Host Bus Adapter specification Physical link width Negotiable link width Type x8, x4, x2, x1 Low-profile card Front door key Note: Server locks Note:...
  • Page 38 Padlock Figure 9. Padlock...
  • Page 39 Integrated cable lock Kensington Figure 10. Integrated cable lock...

  • Page 40: Server Components

    Front door lock Figure 11. Front door lock Server components Notes:...
  • Page 41 Figure 12. Components of server models with up to eight 3.5-inch hot-swap SATA or SAS hard disk drives...
  • Page 42 Notes: Figure 13. Components of server models with up to sixteen 2.5-inch hot-swap SAS hard disk drives...
  • Page 43 Notes: Figure 14. Components of server models with up to four 3.5-inch non-hot-swap SATA hard disk drives...
  • Page 44 CRU identification Notes: Description Self-service CRU Optional-service CRU...
  • Page 45 Description Self-service CRU Optional-service CRU Hot-swap hard disk drive status LEDs Note:...
  • Page 46 Figure 15. 3.5-inch hot-swap hard disk drive status LEDs...
  • Page 47 Figure 16. 2.5-inch hot-swap hard disk drive status LEDs Hard disk drive activity LED Hard disk drive RAID status LED Description RAID card...
  • Page 48 Note: ThinkServer RAID 500 Adapter (also known as ThinkServer 9240-8i RAID 0/1 Adapter) Figure 17. ThinkServer RAID 500 Adapter Port 0 Port 1 ThinkServer RAID 500 Upgrade Key for Advanced RAID connector...
  • Page 49 External connector ThinkServer RAID 700 Adapter (also known as ThinkServer 9260-8i SAS RAID Adapter) Figure 18. ThinkServer RAID 700 Adapter Ports 7-4 Ports 3-0 External connector ThinkServer RAID 700 Battery connector...
  • Page 50 ThinkServer RAID 710 Adapter (also known as 9270CV-8i RAID adapter) Figure 19. ThinkServer RAID 710 Adapter Port 1 Port 2 Expander card Note:...
  • Page 51 Figure 20. Expander card Hot-swap hard-disk-drive backplane...
  • Page 52 Notes: Figure 21. Backplane locations 3.5-inch hot-swap hard-disk-drive backplane...
  • Page 53 Figure 22. Front view of the 3.5-inch hot-swap hard-disk-drive backplane Figure 23. Rear view of the 3.5-inch hot-swap hard-disk-drive backplane 8-pin power connector Mini-SAS signal cable connector 0...
  • Page 54 2.5-inch hot-swap hard-disk-drive backplane Figure 24. Front view of the 2.5-inch hot-swap hard-disk-drive backplane Figure 25. Rear view of the 2.5-inch hot-swap hard-disk-drive backplane 8-pin power connector...

  • Page 55: Connecting The Cables

    Mini-SAS signal cable connector 1 Mini-SAS signal cable connector 0 Connecting the cables Connecting the mini-SAS signal cables from the system board to the hot-swap hard-disk-drive backplanes Figure 26. Mini-SAS signal cable with four SATA ports and one SATA SGPIO port...
  • Page 56 Notes: SATA signal cable label System board SATA connector SATA connector 0 SATA connector 1 SATA connector 2 SATA connector 3 Note: Connecting the mini-SAS signal cables from the RAID card to the hot-swap hard-disk-drive backplanes Note:...
  • Page 57 Figure 27. Connecting the mini-SAS signal cables from the RAID card to the backplanes Connecting cables from the RAID card to the expander card, and then from the expander card to the hot-swap hard-disk-drive backplanes...
  • Page 59 Figure 28. Connecting cables from the expander card to the 2.5-inch hot-swap hard-disk-drive backplanes Connecting the SATA signal cables from the system board to the non-hot-swap hard disk drives...
  • Page 60 Non-hot-swap hard disk drive Power connector System board SATA connector System board components Figure 29. System board components...
  • Page 61 System fan 3 connector Microprocessor socket 2 Microprocessor socket 1 Microprocessor 2 fan connector Microprocessor 2 power connector Memory slots (6) Memory slots (6) Main power connector...
  • Page 62 Power Management Bus (PMBus) connector System fan 2 connector Microprocessor 1 fan connector Microprocessor 1 power connector Platform Controller Hub (PCH) iButton socket System fan 1 connector 18 20 21 SATA connectors SATA SGPIO connector SAS connector 4-7 SAS connector 0-3...
  • Page 63 Internal USB Type A connector TMM Premium connector TPM connector Intelligent Diagnostics Module connector Front panel connector Internal USB connector 5-6 Internal USB connector 7-8 System board battery PCI card slot (PCI slot 1) PCI Express x8 card slot (PCI-E slot 2) PCI Express x8 card slot (PCI-E slot 3)
  • Page 64 ThinkServer Management Module PCI Express x8 card slot (PCI-E slot 4) PCI Express x16 card slot (PCI-E slot 5) PCI Express x8 card slot (PCI-E slot 6) System board jumpers and switches Figure 30. Default jumper setting...
  • Page 65 Figure 31. System board jumpers and switches Table 2. System jumpers Attention: ThinkServer Management Module Enable/Disable jumper...
  • Page 66 Clear CMOS jumper Note: Rack Installation Instructions...
  • Page 67 Switches Figure 32. Switches Table 3. Switches BIOS recovery switch Clear password switch...

  • Page 68: System Board Leds

    Rack Installation Instructions ME in force update switch Note: Rack Installation Instructions System board LEDs...
  • Page 69 Figure 33. System board LEDs System fan error LEDs Microprocessor fan error LEDs...
  • Page 70 ThinkServer Management Module status LED ThinkServer Management Module Color Description status LED...

  • Page 71: Chapter 4. Turning On And Turning Off The Server

    Chapter 4. Turning on and turning off the server Turning on the server ThinkServer Management Module User Guide Turning off the server CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device.
  • Page 72 Notes:...

  • Page 73: Chapter 5. Configuring The Server

    Chapter 5. Configuring the server Using the Setup Utility program Starting the Setup Utility program Viewing information in the Setup Utility program Main Advanced Processor Configuration Memory Configuration...
  • Page 74 SATA/SAS Configuration Server Management System Information Setup Utility program interface Notes: Main menu Main Main Advanced menu Advanced Advanced...
  • Page 75 Notes: Enabled Disabled Advanced Chipset Configuration Processor Configuration Memory Configuration ACPI Configuration SATA/SAS Configuration PCI/PCIE Configuration USB Configuration Serial Configuration Network Setup Security menu Security Notes: Enabled Disabled Security Administrator Password User Password TPM/TCM Server Management menu Server Management Server Management BMC Firmware Revision...

  • Page 76: Setting The System Date And Time

    BMC Status Erase SEL System Information BMC Network Configuration Boot Options menu Boot Options Boot Manager menu Boot Manager Save & Exit menu Save & Exit Save & Exit Save & Exit Save Changes and Exit Save Changes and Reset Discard Changes and Exit Discard Changes Restore Defaults...

  • Page 77: Using Passwords

    Using passwords Setup Utility program password types Administrator password User password Note: Password considerations Notes: Setting, changing, or deleting a password...

  • Page 78: Selecting A Startup Device

    Security Administrator Password User Password Note: Selecting a startup device Note: Note: Boot Options Boot Option #1 Boot Option #5 Configuring the TPM function Security TPM/TCM ➙ TPM Support TPM Support Enabled TPM Support Enabled TPM State TPM State Enabled...

  • Page 79: Exiting The Setup Utility Program

    Exiting the Setup Utility program Save & Exit ➙ Save Changes and Exit Save & Exit ➙ Discard Changes and Exit Save & Exit ➙ Restore Defaults Save & Exit Updating or recovering the BIOS Updating (flashing) the BIOS Notes: Save as User Defaults Save &...
  • Page 80 Defaults Save & Exit Recovering from a BIOS update failure Note: Note:...
  • Page 81 Using the ThinkServer EasyStartup program ThinkServer EasyStartup ThinkServer EasyStartup Features of the ThinkServer EasyStartup program ThinkServer EasyStartup Starting the ThinkServer EasyStartup program User Guide...
  • Page 82 ThinkServer EasyStartup Note: ThinkServer EasyStartup Next Agree Notes: Compatibility notes User Guide Home Compatibility notes User Guide Hardware list Configure RAID...
  • Page 83 Install operating system Download drivers ThinkServer EasyStartup Note: About Using the ThinkServer EasyStartup program on a Windows operating system ThinkServer EasyStartup ThinkServer EasyStartup Notes: ThinkServer EasyStartup ThinkServer EasyStartup ThinkServer EasyStartup ThinkServer EasyStartup Note:...
  • Page 84 Configuring RAID About RAID RAID 0 RAID 1...
  • Page 85 RAID 5 RAID 10 RAID 50 Note: MegaRAID SAS Software User Guide Configuring RAID using the ThinkServer EasyStartup program ThinkServer EasyStartup...
  • Page 86 ThinkServer EasyStartup ThinkServer EasyStartup Configuring the ThinkServer RAID 100 or RAID 300 RAID array status Online Degrade Offline Starting the LSI Software RAID Configuration Utility program LSI Software RAID Configuration Utility program interface...
  • Page 87 Management Menu Management Menu Configure Initialize Note: Objects Rebuild Check Consistency Table 4. LSI Software RAID Configuration Utility program menu items Menu item Submenu item Comments Configure Easy Configuration New Configuration View/Add Configuration Clear Configuration Select Boot Drive Initialize...
  • Page 88 Table 4. LSI Software RAID Configuration Utility program menu items (continued) Menu item Submenu item Comments Objects Adapter Virtual Drive Physical Drive Rebuild Check Consistency Creating, adding, or deleting a RAID array Note: Easy Configuration View/Add Configuration Clear Configuration Attention: New Configuration Attention:...
  • Page 89 Initializing a virtual drive Notes: Initialize Setting a hot-spare drive MegaRAID SAS Software User Guide Objects ➙ Physical Drive Make Hot Spare Rebuilding a physical drive...
  • Page 90 MegaRAID SAS Software User Guide Rebuild Note: Note: Objects ➙ Adapter ➙ Rebuild Rate Running a consistency check Check Consistency...
  • Page 91 Note: Objects ➙ Adapter ➙ Chk Const Rate Installing and using the MegaRAID Storage Manager program ThinkServer EasyStartup ThinkServer EasyStartup MegaRAID SAS Software User Guide Note: MegaRAID SAS Software User Guide Configuring the advanced SATA/SAS hardware RAID ThinkServer EasyStartup ThinkServer EasyStartup Note: ThinkServer EasyStartup...
  • Page 92 MegaRAID SAS Software User Guide Configuring the Ethernet controllers Updating the firmware Using the Firmware Updater program Note: Using the Lenovo ThinkServer EasyManage program...

  • Page 95: Chapter 6. Installing, Removing, Or Replacing Hardware

    Chapter 6. Installing, removing, or replacing hardware Guidelines Precautions...
  • Page 96 Handling static-sensitive devices Attention: Notes:...
  • Page 97 Note: System reliability guidelines Working inside the server with the power on Attention: Removing the server cover Attention:...
  • Page 98 Note: Notes: Figure 34. Sliding the server cover to the rear...

  • Page 99: Removing And Reinstalling The Front Bezel

    Figure 35. Removing the server cover Attention: Removing and reinstalling the front bezel Attention: Note:...
  • Page 100 Figure 36. Removing the front bezel...
  • Page 101 Figure 37. Installing the front bezel Removing and reinstalling the PCI card bracket assembly Attention:...
  • Page 102 Figure 38. Releasing the PCI card bracket assembly Figure 39. Removing the PCI card bracket assembly...
  • Page 103 Figure 40. Installing the small bracket into the third slot of the main bracket Figure 41. Installing the small bracket into the fourth slot of the main bracket...
  • Page 104 Figure 42. Reinstalling the PCI card bracket assembly Installing, removing, or replacing hardware Notes: Attention:...
  • Page 105 Installing or removing a memory module Note: Memory module installation rules...
  • Page 106 Figure 43. Memory slots on the system board Note: Figure 44. CPU1 DIMMs...
  • Page 107 Table 5. Memory module installation rules for servers with one microprocessor CPU1 DIMM Note: Figure 45. CPU1 DIMMs and CPU2 DIMMs Table 6. Memory module installation rules for servers with two microprocessors CPU1 DIMM CPU2 DIMM...
  • Page 108 Memory module installation order in independent mode Note: Table 7. Memory module installation order in independent mode for servers with one microprocessor CPU1 DIMM Table 8. Memory module installation order in independent mode for servers with two microprocessors CPU1 DIMM CPU2 DIMM Memory module installation order in mirroring mode Notes:...
  • Page 109 Memory module installation order in sparing mode Note: Table 11. Memory module installation order in sparing mode for servers with one microprocessor CPU1 DIMM Table 12. Memory module installation order in sparing mode for servers with two microprocessors CPU1 DIMM CPU2 DIMM Memory module installation order in lockstep mode Notes:...

  • Page 110: Installing A Memory Module

    Table 14. Memory module installation order in lockstep mode for servers with two microprocessors CPU1 DIMM CPU2 DIMM Installing a memory module Attention: Notes: Figure 46. Opening the retaining clips of the memory slots...
  • Page 111 Note: Note: Figure 47. Installing a memory module What to do next: Removing a memory module Attention: Note:...

  • Page 112: Installing Or Removing The Ethernet Card

    Figure 48. Removing a memory module What to do next: Installing or removing the Ethernet card Note: Installing the Ethernet card Attention: Notes:...
  • Page 113 Note: Figure 49. Removing a PCI Express card slot bracket Note:...
  • Page 114 Figure 50. Installing the Ethernet card What to do next: Note: ThinkServer EasyStartup ThinkServer EasyStartup...
  • Page 115 Removing the Ethernet card Attention: Notes:...
  • Page 116 Note: Figure 51. Removing the Ethernet card What to do next: Installing or removing the RAID card Note:...
  • Page 117 Installing the RAID card Attention: Notes: Note: What to do next: Note:...
  • Page 118 Removing the RAID card Attention: Notes: Note: Note: What to do next:...
  • Page 119 Replacing the ThinkServer RAID Super Capacitor Module Attention: Notes:...
  • Page 120 Figure 52. Removing the ThinkServer RAID Super Capacitor Module with the bracket from the chassis Figure 53. Removing the ThinkServer RAID Super Capacitor Module from the bracket...
  • Page 121 Figure 54. Installing the ThinkServer RAID Super Capacitor Module into the bracket Figure 55. Installing the ThinkServer RAID Super Capacitor Module with the bracket on the chassis...
  • Page 122 Figure 56. Connecting the new ThinkServer RAID Super Capacitor Module to the extended cable from the ThinkServer RAID 710 Adapter What to do next: Installing the ThinkServer RAID FastPath Software Key Attention: Notes: MegaRAID SAS Software User Guide...
  • Page 123 Figure 57. Inserting the software key into the software key connector What to do next: Installing the ThinkServer RAID CacheCade Software Key Attention: Notes: MegaRAID SAS Software User Guide...
  • Page 124 Figure 58. Inserting the CacheCade key into the CacheCade key connector What to do next: Installing or removing the ThinkServer RAID 500 Upgrade Key for Advanced RAID Installing the TR 500 Key Attention: Attention:...
  • Page 125 Note: Note: Note: Figure 59. Installing the TR 500 Key What to do next: MegaRAID SAS Software User Guide...
  • Page 126 Removing the TR 500 Key Attention: Attention: Notes: Note: Figure 60. Removing the TR 500 Key...
  • Page 127 What to do next: MegaRAID SAS Software User Guide Installing or removing the ThinkServer RAID 700 Battery Attention: Installing the TR 700 Battery Attention: Note:...
  • Page 128 Note: Notes: Figure 61. Installing the TR 700 Battery What to do next: Removing the TR 700 Battery Attention:...
  • Page 129 Notes: Note: Figure 62. Removing the TR 700 Battery What to do next:...
  • Page 130 Installing or removing the ThinkServer RAID 100 or RAID 300 upgrade key for Advanced RAID Installing the TR 100 or TR 300 Key Attention: Notes:...
  • Page 131 Figure 63. Installing the TR 100 or TR 300 Key What to do next: Removing the TR 100 or TR 300 Key Attention:...
  • Page 132 Notes: Figure 64. Removing the TR 100 or TR 300 Key...
  • Page 133 What to do next: Installing or removing the ThinkServer Management Module Premium Installing the TMM Premium Attention: Notes:...
  • Page 134 Note: Figure 65. Installing the TMM Premium What to do next: ThinkServer Management Module User Guide Removing the TMM Premium Attention:...
  • Page 135 Notes: Figure 66. Removing the TMM Premium What to do next:...
  • Page 136 Installing or removing the ThinkServer Trusted Platform Module Installing the ThinkServer Trusted Platform Module Attention: Notes: Note:...
  • Page 137 Figure 67. Installing the TPM What to do next: Removing the ThinkServer Trusted Platform Module Attention: Notes:...
  • Page 138 Note: Figure 68. Removing the TPM What to do next:...

  • Page 139: Diagnostics

    Installing or removing the intelligent diagnostics module Installing the intelligent diagnostics module Attention: Note:...
  • Page 140 Figure 69. Installing the IDM...
  • Page 141 Figure 70. Cable routing What to do next: Removing the intelligent diagnostics module Attention: Notes:...
  • Page 142 Figure 71. Removing the IDM What to do next:...
  • Page 143 Installing or replacing an optical drive Attention: Attention: CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation.
  • Page 144 Notes: Figure 72. Removing the EMI shield for the upper optical drive bay...
  • Page 145 Figure 73. Removing the optical drive...
  • Page 146 Note: Figure 74. Installing the optical drive Figure 75. Connecting cables to the rear of the optical drive...
  • Page 147 What to do next: Installing or replacing a hot-swap hard disk drive Attention: Attention: Notes:...
  • Page 148 Figure 76. Opening the front door of the server...
  • Page 149 Figure 77. Opening the handle of the hot-swap hard disk drive or the dummy tray...
  • Page 150 Figure 78. Removing the hot-swap hard disk drive or the dummy tray Note:...
  • Page 151 Figure 79. Installing the hot-swap hard disk drive What to do next: Installing or removing a non-hot-swap hard disk drive...
  • Page 152 Attention: Installing a non-hot-swap hard disk drive Attention: Notes:...
  • Page 153 Figure 80. Opening the front door of the server...
  • Page 154 Figure 81. Removing the EMI-protective panel Note:...
  • Page 155 Note: Figure 82. Installing the non-hot-swap hard disk drive into the bracket Figure 83. Connecting cables to the rear of the non-hot-swap hard disk drive...
  • Page 156 Figure 84. Installing the EMI-protective panel What to do next: Removing a non-hot-swap hard disk drive Attention:...
  • Page 157 Notes: Figure 85. Opening the front door of the server...
  • Page 158 Figure 86. Removing the EMI-protective panel...
  • Page 159 Figure 87. Sliding the non-hot-swap hard disk drive out of the bay Note:...
  • Page 160 Figure 88. Installing the EMI-protective panel What to do next: Installing or replacing a 2.5-inch solid-state drive...
  • Page 161 Attention: Notes: Installing a 2.5-inch solid-state drive into a 3.5-inch hard-disk-drive bay Attention: Note:...
  • Page 162 Figure 89. Opening the handle of the dummy tray...
  • Page 163 Figure 90. Removing the dummy tray Note:...
  • Page 164 Figure 91. Positioning the 2.5-inch solid-state drive into the drive adapter Figure 92. Installing the screws to secure the solid-state drive to the drive adapter...
  • Page 165 Figure 93. Installing the screws to secure the drive adapter and the solid-state drive to the bracket Figure 94. Installing the solid-state drive...
  • Page 166 What to do next: Replacing a 2.5-inch solid-state drive from a 3.5-inch hard-disk-drive bay Attention:...
  • Page 167 Figure 95. Opening the handle of the 3.5-inch drive bracket...
  • Page 168 Figure 96. Removing the bracket with the solid-state drive Figure 97. Removing the screws that secure the solid-state drive and the drive adapter...
  • Page 169 Figure 98. Removing the screws that secure the solid-state drive Figure 99. Removing the solid-state drive from the drive adapter What to do next: Installing or replacing a tape drive...
  • Page 170 Installing or replacing an internal RDX drive Attention: Notes:...
  • Page 171 Figure 100. Removing the EMI shield for the optical drive bay...
  • Page 172 Figure 101. Removing the RDX drive...
  • Page 173 Note: Figure 102. Installing the RDX drive Figure 103. Connecting cables to the rear of the RDX drive...

  • Page 174: Installing Or Replacing The Microprocessor

    What to do next: Connecting an external tape drive Attention: Notes: Figure 104. Mini-SAS connector on the external tape drive Installing or replacing the microprocessor Installing the second microprocessor Attention:...
  • Page 175 CAUTION: Turn off the server and wait three to five minutes to let the server cool before removing the server cover. Notes:...
  • Page 176 Figure 105. Opening the handle and microprocessor retainer Note: Figure 106. Removing the microprocessor socket cover...
  • Page 177 Figure 107. Do not touch the pins Note: Figure 108. Installing the microprocessor...

  • Page 178: Replacing The Microprocessor

    Figure 109. Securing the microprocessor in the socket What to do next: Replacing the microprocessor Attention: CAUTION: The heat sink and fan assembly and the microprocessor might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover.
  • Page 179 Notes: Figure 110. Opening the handle and microprocessor retainer...
  • Page 180 Notes: Figure 111. Removing the microprocessor Figure 112. Do not touch the pins...
  • Page 181 Note: Figure 113. Installing the microprocessor...
  • Page 182 Figure 114. Securing the microprocessor in the socket What to do next: Installing or replacing a hot-swap redundant power supply Attention:...
  • Page 183 CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
  • Page 184 Figure 115. Removing the protective shield for the power supply bay Note:...
  • Page 185 Figure 116. Removing a hot-swap redundant power supply Figure 117. Installing a hot-swap redundant power supply...
  • Page 186 Replacing the PCI Express solid-state drive Attention: Notes: Note: Note:...
  • Page 187 What to do next: Replacing the non-hot-swap power supply assembly Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
  • Page 188 Figure 118. Removing the non-hot-swap power supply assembly...
  • Page 189 Note: Figure 119. Installing the non-hot-swap power supply assembly What to do next: Replacing the hot-swap hard-disk-drive backplane Attention:...
  • Page 190 Notes:...
  • Page 191 Note: Figure 120. Removing the hard-disk-drive cage Figure 121. Removing the 3.5-inch hot-swap hard-disk-drive backplane...
  • Page 192 Figure 122. Removing the 2.5-inch hot-swap hard-disk-drive backplane Note: Figure 123. Installing the 3.5-inch hot-swap hard-disk-drive backplane...
  • Page 193 Figure 124. Installing the 2.5-inch hot-swap hard-disk-drive backplane Note: Figure 125. Installing the 2.5-inch hot-swap hard-disk-drive backplane...
  • Page 194 Note: Figure 126. Installing the hard-disk-drive cage What to do next: Replacing the power distribution board and cage assembly Attention:...
  • Page 195 CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
  • Page 196 Figure 127. Removing the power distribution board and cage assembly...
  • Page 197 Note: Figure 128. Installing the power distribution board and cage assembly What to do next: Replacing the front panel board assembly Attention:...
  • Page 198 Notes:...
  • Page 199 Figure 129. Removing the front panel board assembly...

  • Page 200: Replacing The Front System Fan

    Figure 130. Installing the front panel board assembly What to do next: Replacing the front system fan 1 Attention:...
  • Page 201 CAUTION: Hazardous moving parts. Keep fingers and other body parts away. Notes: Figure 131. Removing the front system fan 1...

  • Page 202: Replacing The Rear System Fan

    Figure 132. Installing the front system fan 1 What to do next: Replacing the rear system fan Attention:...
  • Page 203 CAUTION: Hazardous moving parts. Keep fingers and other body parts away. Notes:...
  • Page 204 Figure 133. Removing the rear system fan...

  • Page 205: Replacing The Heat Sink And Fan Assembly

    Figure 134. Installing the rear system fan What to do next: Replacing the heat sink and fan assembly 1 Attention:...
  • Page 206 CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: The heat sink and fan assembly might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover. Notes:...
  • Page 207 Note: Figure 135. Removing the screws that secure the heat sink and fan assembly 1 Notes:...

  • Page 208: Replacing The System Board Battery

    Figure 136. Installing the screws to secure the heat sink and fan assembly 1 Note: What to do next: Replacing the system board battery Attention:...
  • Page 209 DANGER Danger of explosion if battery is incorrectly replaced. When replacing the lithium coin cell battery, use only the same or an equivalent type that is recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.

  • Page 210: Replacing The System Board

    Figure 137. Removing the system board battery Figure 138. Installing the system board battery What to do next: Replacing the system board Attention: Note: CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
  • Page 211 CAUTION: The heat sinks and microprocessors might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover. Note:...
  • Page 212 Figure 139. Removing the screws that secure the system board...
  • Page 213 Note: Figure 140. Removing the system board...
  • Page 214 Figure 141. Installing the system board...
  • Page 215 Figure 142. Installing the screws to secure the system board Note:...
  • Page 216 Figure 143. Installing the microprocessor socket cover Figure 144. Securing the microprocessor retainer...
  • Page 217 What to do next: Note: Completing the parts replacement Reinstalling the server cover and reconnecting cables Attention: Attention: Note:...
  • Page 218 Figure 145. Closing the server cover Figure 146. Installing the server cover...

  • Page 219: Updating The Server Configuration

    Note: Attention: Note: Updating the server configuration Download & Drivers ➙ ThinkServer...
  • Page 221 Chapter 7. Troubleshooting and diagnostics Troubleshooting procedure Viewing the status and diagnostic LEDs Using a diagnostic program...

  • Page 222: Viewing The System Event Log

    Continue Accept Viewing the system event log ThinkServer Management Module User Guide Basic troubleshooting tables ThinkServer EasyStartup program problems Note: Symptom Action ThinkServer EasyStartup ThinkServer EasyStartup...

  • Page 223: Optical Drive Problems

    Symptom Action Optical drive problems Notes: Action Symptom...

  • Page 224: Hard Disk Drive Problems

    Symptom Action Hard disk drive problems Notes: Symptom Action...

  • Page 225: Memory Module Problems

    Symptom Action Memory module problems Notes: Symptom Action...
  • Page 226 Keyboard, mouse, or USB device problems Symptom Action...
  • Page 227 Chapter 8. Getting information, help, and service Information resources Using the documentation User Guide and Hardware Maintenance Manual ThinkServer Web site Lenovo Support Web site...

  • Page 228: Help And Service

    Help and service Before you call Calling for service Problem determination Hardware repair Engineering Change management...
  • Page 229 Safety, Warranty, and Support Information Using other services Warranty Purchasing additional services...

  • Page 231: Appendix A. Notices

    Appendix A. Notices Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing...
  • Page 232 Trademarks Important notes Particulate contamination Attention:...

  • Page 233: Recycling Information

    Table 15. Limits for particulates and gases Contaminant Limits Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size Environmental conditions for process measurement and control systems: Airborne contaminants Polyvinyl Chloride (PVC) cable and cord notice WARNING: Wash hands after handling Recycling information Battery return program...
  • Page 234 Battery recycling information for the European Union Notice: Requirements for Batteries Containing Perchlorate...
  • Page 235 Important WEEE information Restriction of Hazardous Substances Directive (RoHS) European Union RoHS German Ordinance for Work gloss statement Export classification notice...

  • Page 236: Electronic Emission Notices

    Electronic emission notices Federal Communications Commission (FCC) Statement Industry Canada Class A emission compliance statement United Kingdom telecommunications safety requirement European Union - Compliance to the Electromagnetic Compatibility Directive...

  • Page 237: Eurasian Compliance Mark

    Warning: German Class A compliance statement Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse A EU-Richtlinie zur Elektromagnetischen Verträglichkeit Deutschland: Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Betriebsmittein Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln, EMVG vom 20. Juli 2007 (früher Gesetz über die elektromagnetische Verträglichkeit von Geräten), bzw.
  • Page 238 ENERGY STAR model information...

  • Page 239: Index

    Index...

This manual is also suitable for:

70b570b670b7Thinkserver td340

Table of Contents